1.1 本规范涵盖了一般工业用途的圆孔多孔板和筛网的尺寸，包括根据指定的标称粒径对材料进行分离或分级，并列出了5英寸的开口标准。（125毫米）至0.020英寸。（500μm）用不同等级服务的棒材尺寸和板材厚度冲孔。检查工业多孔板和滤网的方法作为信息包含在 附录X3 . 1.2 本规范不适用于带有方形、六边形、开槽或其他形状开口的穿孔板或滤网。 1.3 以英寸表示的值- 磅单位应视为标准单位。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers the sizes of round opening perforated plate and screens for general industrial uses, including the separating or grading of materials according to designated nominal particle size, and lists standards for openings from 5 in. (125 mm) to 0.020 in. (500 μm) punched with bar sizes and thicknesses of plate for various grades of service. Methods of checking industrial perforated plate and screens are included as information in Appendix X3 . 1.2 This specification does not apply to perforated plate or screens with square, hexagon, slotted, or other shaped openings. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.