BS EN ISO 16092-1:2018规定了设计、制造和供应压力机的人员应采取的技术安全要求和措施，这些压力机用于加工冷金属或部分冷金属材料，但也可用于加工其他板材（如纸板、塑料、橡胶、皮革等）。本文件中的要求考虑了ISO 12100:2010，3.23中定义的预期用途，以及ISO 12100:2010，3.24中定义的合理可预见的误用。本文件假定从各个方向进入压力机，处理第4条所述机器使用寿命各阶段的所有重大危险，并规定了操作员和其他接触人员的安全措施。 本文件适用于可独立运行的压力机，也可作为设计集成在制造系统中的压力机的指南。覆盖式压力机通过与滑块/滑枕相连或由滑块/滑枕操作的工具或模具，以机械方式传递力，以切割、成型或加工冷金属或其他板材，尺寸范围从单操作员生产小工件的小型高速机器到多操作员生产大工件的大型相对低速机器。交叉引用:IEC 61496-2:2013ISO 13851: 2.adadadadadadadadadadadadadadad2）adadad2）adadad2）2）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）3）参考参考参考参考参考参考参考参考参考参考参考参考参考参考参考参考参考文献（adadadadadadadadad3）3）3）3）3）3）adadadadadadadadadadad3）3）3）3）3）adadadadadadadadadad3）3）3）3）3）3）3）adadadadadadadadadadadadad3）3）3）3）3）3）3）3）adadadadadadad3）3）3）3）3）3）参考参考参考参考参考参考参考参考参考参考参考参考参考参考参考参考参考6-1EN 1005-2ISO 9355-3EN 1837ISO 14738ISO 15534-2ISO14118EN 1005-1ISO 6385ISO 15534-1ISO 15534-3ISO/TR 11688-2ISO 11161ISO 9355-1EN 1127-1EN 614-2IEC 60529EN 1005-3EN 1299ISO 9355-2ISO 11228-1购买本文件时提供的所有现行修订均包含在购买本文件中。

BS EN ISO 16092-1:2018 specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses which are intended to work cold metal or material partly of cold metal, but which can be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather, etc.).The requirements in this document take account of intended use, as defined in ISO 12100:2010, 3.23, as well as reasonably foreseeable misuse, as defined in ISO 12100:2010, 3.24. This document presumes access to the press from all directions, deals with all significant hazards during the various phases of the life of the machine described in Clause 4, and specifies the safety measures for both the operator and other exposed persons.This document applies to presses which can function independently and can also be used as a guide for the design of presses which are intended to be integrated in a manufacturing system.The covered presses transmit force mechanically to cut, form, or work cold metal or other sheet materials by means of tools or dies attached to or operated by slides/ram in range in size from small high speed machines with a single operator producing small workpieces to large relatively slow speed machines with several operators and large workpieces.Cross References:IEC 61496-2:2013ISO 13851:2002IEC 61496-1:2012ISO 14119:2013 ED2ISO 13854:1996ISO 4413:2010 CD-ROM Ed 3ISO 14120:2015ISO 13857:2008 Ed 1IEC 60204-1:2016ISO 12100:2010 Ed 1ISO 230-5:2000ISO 13855:2010 Ed 2ISO 13732-1:2006 Ed 1ISO 4414:2010 CD-ROM Ed 3ISO 13850ISO 11428ISO 7731ISO/TR 11688-1IEC 60947-5-8ISO 14122 (all parts)ISO 13849 (all parts)IEC 61496-3IEC 61310-2EN 626-1EN 1005-2ISO 9355-3EN 1837ISO 14738ISO 15534-2ISO 14118EN 1005-1ISO 6385ISO 15534-1ISO 15534-3ISO/TR 11688-2ISO 11161ISO 9355-1EN 1127-1EN 614-2IEC 60529EN 1005-3EN 1299ISO 9355-2ISO 11228-1All current amendments available at time of purchase are included with the purchase of this document.