BS EN 1916规定了无钢筋、钢纤维和钢筋预制混凝土管道和配件的要求，并描述了其试验方法，柔性接头和标称尺寸不超过DN 1750或WN/HN 1200/1800，其主要预期用途是输送污水，雨水和地表水在重力作用下或偶尔在通常埋在地下的管道中处于低压头。范围包括拟通过顶管、微隧道或其他非开挖技术安装的管道（统称为“顶管”）。 交叉引用:BS 3123BS 4027BS 4027BS 4035BS 44444 9BS 4482BS 4482BS 4483BS 4484-1BS 4921:1998BS 5204-1BS 5204-2BS 7921:1998BS 5204-1BS 5204-2BS 7979BS 8500-2:2006BS EN 197-1BS EN 197-4BS 4027BS 4027BS 4027BS 4027BS 4027BS 4035BS 4442BS 4449BS 4482BS 4482BS 4483BS 4444444444-1BS 4421:1998BS 5204-1BS 44444444-1BS 4421:5204-2BS 797979BS 8500-2 4BS EN 10088-2:2005BS EN 12620BS EN 13121-3BS EN 13923BS EN 14216BS EN 14364BS EN 15167-1BS EN ISO 1461BS 5911-100:1998BS5911-120:1989BS 8110-1:1997BS 8110-2:1985BS 8500-1:2006BS EN 206-1:2000BS EN 752BS EN 1295-1:1998BS EN 1610:1998

BS EN 1916 specifies requirements and describes test methods for precast concrete pipes and fittings, unreinforced, steel fibre and reinforced, with flexible joints and nominal sizes not exceeding DN 1750 or WN/HN 1200/1800, for which the main intended use is the conveyance of sewage, rainwater and surface water under gravity or occasionally at low head of pressure in pipelines that are generally buried. The scope includes pipes (collectively referred to as "jacking pipes") intended to be installed by pipe jacking, microtunnelling or other trenchless technology.Cross References:BS 3123BS 4027BS 4035BS 4449BS 4482BS 4483BS 4484-1BS 4921:1998BS 5204-1BS 5204-2BS 7979BS 8500-2:2006BS EN 197-1BS EN 197-4BS EN 450-1BS EN 681-1BS EN 934-2BS EN 1008BS EN 1011-2BS EN 1011-3BS EN 1796BS EN 1916:2002BS EN 10025-1BS EN 10088-2:2004BS EN 10088-2:2005BS EN 12620BS EN 13121-3BS EN 13923BS EN 14216BS EN 14364BS EN 15167-1BS EN ISO 1461BS 5911-100:1998BS 5911-120:1989BS 8110-1:1997BS 8110-2:1985BS 8500-1:2006BS EN 206-1:2000BS EN 752BS EN 1295-1:1998BS EN 1610:1998