ISO 5660-1:2015-反火试验 - 放热烟雾产生和质量损失率 - 第1部分:热释放速率（锥形量热法）和烟雾产生率（动态测量）-国家数字标准馆

现行 ISO 5660-1:2015

到馆阅读

收藏跟踪

购买正版

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) 反火试验 - 放热烟雾产生和质量损失率 - 第1部分:热释放速率（锥形量热法）和烟雾产生率（动态测量）

发布日期： 2015-03-20

ISO 5660-1:2015规定了用外部点火器评估水平方向暴露在受控辐照度水平下的试样的热释放率和动态烟雾产生率的方法。通过测量氧浓度和燃烧产物流中的流速得出的耗氧量来确定热释放速率。点火时间（持续燃烧）也在本测试中测量。
通过测量燃烧产物流对激光束的衰减来计算动态烟雾产生率。在整个试验过程中，无论试样是否燃烧，都会记录烟雾遮蔽情况。

ISO 5660-1:2015 specifies a method for assessing the heat release rate and dynamic smoke production rate of specimens exposed in the horizontal orientation to controlled levels of irradiance with an external igniter. The heat release rate is determined by measurement of the oxygen consumption derived from the oxygen concentration and the flow rate in the combustion product stream. The time to ignition (sustained flaming) is also measured in this test.
The dynamic smoke production rate is calculated from measurement of the attenuation of a laser light beam by the combustion product stream. Smoke obscuration is recorded for the entire test, regardless of whether the specimen is flaming or not.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 13.220.50消防 - 建筑材料和构件的阻燃性

关联关系

研制信息

归口单位： ISO/TC 92/SC 1

相似标准/计划/法规

BS PD ISO/TS 5660-3-2012

Reaction-to-fire tests. Heat release, smoke production and mass loss rate-Guidance on measurement
对火灾测试的反应热释放、烟雾产生和质量损失率

BS PD ISO/TS 5660-4-2016

Reaction-to-fire tests. Heat release, smoke production and mass loss rate-Measurement of low levels of heat release
对火灾测试的反应热释放、烟雾产生和质量损失率

ISO/TS 5660-3-2012

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
对火灾试验的反应——热释放、烟雾产生和质量损失率第3部分:测量指南

ISO/TS 5660-4-2016

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release
反火试验 - 放热烟雾产生和质量损失率 - 第4部分:低放热水平的测量

BS ISO 5660-1-2015+A1-2019

Reaction-to-fire tests. Heat release, smoke production and mass loss rate-Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
对火灾测试的反应热释放、烟雾产生和质量损失率

KS F ISO 5660-1

연소성능시험 — 열방출률, 연기발생률, 질량감소율 — 제1부: 열방출률(콘칼로리미터법) 및 연기발생률(동적 측정)
着火反应试验.热释放烟雾产生和质量损失率.第1部分:热释放率（锥形量热计法）和烟雾产生率（动态测量）

KS F ISO 5660-1

연소성능시험 — 열방출률, 연기발생률, 질량감소율 — 제1부: 열방출률(콘칼로리미터법) 및연기발생률(동적 측정)
反火测试 - 放热烟雾产生和质量损失率 - 第1部分:热释放速率（锥形量热计方法）和烟雾产生率（动态测量）

BS PD ISO/TS 5660-5-2020

Reaction-to-fire tests. Heat release, smoke production and mass loss rate-Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
对火灾测试的反应热释放、烟雾产生和质量损失率

ISO 5660-1-2015/Amd 1-2019

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) — Amendment 1
着火反应试验.热释放烟雾产生和质量损失率.第1部分:热释放率（锥形量热计法）和烟雾产生率（动态测量）.修改件1

GOST R ISO 5660-1-2020

Испытания по определению реакции на огонь. Интенсивности тепловыделения, дымообразования и потери массы. Часть 1. Определение интенсивности тепловыделения методом конического калориметра и интенсивности дымообразования измерениями в динамическом режиме
对火灾试验的反应热释放、烟气产生和质量损失率第1部分锥形量热计法测定热释放速率和动态测量烟气产生速率

BS 06/30117321 DC

ISO 5660-4. Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Part 4. Measurement of heat release for determination of low levels of combustibility
ISO 5660-4 对火灾测试的反应热释放、烟雾产生和质量损失率第四部分测定低水平燃烧性的热释放测量

ISO/TS 5660-5-2020

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
着火反应试验.热释放烟雾产生和质量损失率.第5部分:还原氧气氛下的热释放率（锥形量热计法）和烟雾产生率（动态测量）

BS ISO/TR 14696-1999

Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL)
对火灾测试的反应使用中型放热量热仪（ICAL）测定材料、产品和组件的燃烧参数

ULC ORD-C2043-0

Fire Test for Smoke and Visible Heat Release for Discrete Products and their Accessories Installed in Air-Handling Spaces
安装在空气处理空间的离散产品及其附件的烟雾和可见热释放的防火试验

Standard Method of Fire Test for Heat and Visible Smoke Release for Discrete Products (CAN/ULC-S142:2016)
离散产品热释放和可见烟雾释放的标准燃烧试验方法（CAN/ULC-S142-2016）

ULC Subject 142

STANDARD METHOD OF FIRE TEST FOR HEAT AND VISIBLE SMOKE RELEASE FOR DISCRETE PRODUCTS (Bulletin, 9/9/2016)
离散产品热释放和可见烟雾释放的标准燃烧试验方法（公告 2016年9月9日）

电缆或光缆在受火条件下的火焰传播及热释放和产烟特性的试验方法
Test methods for electrical or optical cables under fire conditions—Flame spread,heat release and smoke production measurement during test

GB/T 31248-2014

电缆或光缆在受火条件下火焰蔓延、热释放和产烟特性的试验方法
Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions

Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
在垂直电缆槽结构中燃烧时电气或光纤电缆中所含绝缘材料的热释放、火焰蔓延、烟雾遮蔽和质量损失试验的标准试验方法

BS 03/308231 DC

EN 50399-1. Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Part 1: Apparatus
EN 50399-1 火灾条件下电缆的通用试验方法火焰蔓延试验期间电缆的热释放和烟雾产生测量第1部分:仪器

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统