根据ASHRAE 1343-RP，已开发出九种医疗成像系统热增益的标准化测试和报告方法。在本研究的第二阶段，将编制数据表，以协助工程师设计HVAC系统，为成像设备服务。将开发一个表格，根据操作系统的现场测试，提供完整系统的热增益和能量使用。在制造商的协助下，将编制第二套表格，以显示系统部件的典型热增益和能量使用。这些表格将有助于工程师在初步设计期间以及每个房间的设计期间估算冷负荷。 这些方法将产生标准化且一致的热增益数据。这些数据将有助于对医疗建筑的能源使用进行建模，并制定能源性能评级。单位:双

Under ASHRAE 1343-RP, methods have been developed to standardize testing and reporting of heat gain from nine types of medical imaging systems. Under Phase II of this research, tables of data will be developed to assist engineers in designing HVAC systems to serve imaging equipment. One table will be developed to provide heat gain and energy use by complete systems based on field tests of operating systems. A second set of tables will be developed with the assistance of the manufacturers to indicate typical heat gain and energy use by system components. These tables will help engineers to estimate cooling loads during preliminary design as well as during room by room design. The methods will result in standardized and consistent heat gain data. The data will be useful for modeling energy use in healthcare buildings and for developing energy performance ratings.Units: Dual