现行

JB/T 7715-2017

锻模 冷锻模用钢 技术条件
Forging dies—Steels for cold forging dies—Specifications

2017-11-07

现行

JB/T 8431-2017

锻模 热锻模用钢 技术条件
Forging dies—Steels for hot forging dies—Specifications

2017-11-07

现行

YS/T 292-2013

六方螺母冷镦模具用硬质合金毛坯
Hardmetal blanks used for cold forging dies of hexagon nut

2013-05-20

现行

YS/T 241-2013

钢球冷镦模具用硬质合金毛坯
Hardmetal blanks used for cold forging dies of steel ball

2013-05-02

现行

JB/T 4213-2014

紧固件冷镦模 技术条件
Cold heading dies for fasteners - Specifications

2014-07-09

现行

GOST 21546-1988

Штампы молотовые для объемной штамповки. Общие технические условия
锤子死于锻造 一般规格

现行

JB/T 6060.1-2015

锤锻模 零件 第1部分：技术条件
Hammer forging dies - Components - Part 1:Specifications

2015-10-10

现行

JB/T 5111.1-2015

平锻模 零件 第1部分：技术条件
Upset forging dies - Components - Part 1:Specifications

2015-10-10

现行

JB/T 5112-2017

挤压模 冷挤压预应力组合凹模 设计规范
Extrusion dies—Prestressed combined concave dies for cold extrusion—Design specifications

2017-11-07

现行

GB/T 29534-2013

General specifications of combined warm cold forging parts

2013-06-09

现行

GB/T 29534-2013

温锻冷锻联合成形锻件 通用技术条件
General specifications of combined warm-cold forging parts

2013-06-09

现行

ASTM A493-23

Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
冷镦和冷锻用不锈钢丝和线材标准规范

2023-11-01

现行

JB/T 5110.1-2015

螺旋压力机锻模 零件 第1部分：技术条件
Screw press forging dies - Components - Part 1:Specifications

2015-10-10

现行

GB/T 25134-2010

锻压制件及其模具三维几何量光学检测规范
Optical measurement specification of 3D geometry for forgings/stampings and the dies

2010-09-26

现行

GB/T 13314-2008

锻钢冷轧工作辊 通用技术条件
General specifications of forged steel work rolls for cold rolling

2008-05-13

现行

GB/T 30569-2014

直齿锥齿轮精密冷锻件 结构设计规范
Structural design specification for precision cold forging of straight bevel gear

2014-05-06

现行

ASTM B637-23

Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
中高温用沉淀硬化和冷加工镍合金棒材、锻件和锻坯的标准规范

2023-12-01

现行

BS 5L 36-1985

Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter)
99.5%铝（直径不超过10mm）实心冷锻铆钉用钢丝规范

1985-12-31

现行

BS 3L 58-1971

Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)
铝-5%镁合金（直径不超过10mm）实心冷锻铆钉用钢丝规范

1971-08-31

现行

BS 3L 86-1971

Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
铝-铜-镁合金（直径不超过10mm）实心冷锻铆钉用钢丝规范（Cu 2.5 Mg 0.3）

1971-08-31