IEC 60904的本部分描述了纠正光伏器件测试中引入的光谱失配误差的程序，由于测试光谱和参考光谱（例如AM1.5光谱）之间的不匹配，以及参考装置和被测装置的光谱响应率（SR）之间的不匹配，从而降低了系统不确定度。本程序适用于单结器件，但其原理可扩展到多结器件- 连接设备。交叉引用:EN 60904-1IEC 60904-1IEC 60904-3EN ISO 9288:1996IEC 60891EN 60904-8-1EN 60904-1-1EN IEC 60904-3IEC 60904-2ISO 9288IEC/TS 61836IEC 60904-1-1EN 60891IEC 60904-9EN 60904-2IEC 60904-8-1EN 60904-8EN 60904-9IEC TS 61836IEC 60904-8ISO 9288:1989购买本文件时可提供的所有现行修订。

This part of IEC 60904 describes the procedure for correcting the spectral mismatch error introduced in the testing of a photovoltaic device, caused by the mismatch between the test spectrum and the reference spectrum (e.g. AM1.5 spectrum) and by the mismatch between the spectral responsivities (SR) of the reference device and of the device under test and therewith reduce the systematic uncertainty. This procedure is valid for single-junction devices but the principle may be extended to cover multi-junction devices.Cross References:EN 60904-1IEC 60904-1IEC 60904-3EN ISO 9288:1996IEC 60891EN 60904-8-1EN 60904-1-1EN IEC 60904-3IEC 60904-2ISO 9288IEC/TS 61836IEC 60904-1-1EN 60891IEC 60904-9EN 60904-2IEC 60904-8-1EN 60904-8EN 60904-9IEC TS 61836IEC 60904-8ISO 9288:1989All current amendments available at time of purchase are included with the purchase of this document.