1.1 本试验方法包括评价在室温下压缩然后经受低温（空气或二氧化碳气氛）的硫化橡胶在仍处于低温时从夹紧装置取出时从变形中恢复的能力。 1.2 以SI单位表示的值应被视为标准。括号中给出的值仅供参考。 1.3 本标准并不旨在解决与其使用相关的所有安全性问题（如果有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。 1.4 本国际标准是根据世界贸易组织发布的关于制定国际标准、指南和建议的原则的决定中确立的国际公认的标准化原则制定的技术性贸易壁垒委员会。 ======意义和用途====== 4.1 橡胶产品，如飞机上的液压密封件、潜艇舱口垫圈和液压制动杯，可能会暴露在不同的极端温度下。该测试方法提供了一种确定在随后的低温暴露期间压缩力释放后，在正常环境温度下压缩的恢复被抑制程度的方法。

1.1 This test method covers evaluation of the ability of vulcanized rubbers that have been compressed at room temperature and then subjected to low temperature (air or carbon dioxide atmosphere), to recover from deformation when taken from the clamping device while still at the low temperature. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 Rubber products, such as hydraulic seals on aircraft, submarine hatch gaskets, and hydraulic brake cups, may be exposed to varying temperature extremes. This test method provides a means of determining the extent to which recovery from compression at normal ambient temperatures is inhibited upon release of the compressive force during subsequent exposure at low temperatures.