本文件规定了16？附件互换性所需的安装尺寸？MPa（160？bar）符合ISO？6020？2.附件已专门设计用于按照ISO制造的气瓶？6020？2，但这并不限制它们的应用[1]。 本文件涵盖以下附件，根据ISO？6099: —？AP6-杆眼球形，内螺纹（见图？1和表？1）； —？AB5-U形夹支架，球眼，成角度（见图？2和表？2）； —？AA6-L-枢轴销、球面轴承、锁紧板（见图？3和表？3）； —？用于枢轴销的AL6锁定板（见图？4和表？4）； —？AP2-杆U形夹，内螺纹（见图？5和表？5）； —？AP4-杆眼普通，内螺纹（见图？6和表？6）；—？AB2-眼托槽（见图？7和表？7）； —？AB4-直U形夹支架（见图？8和表？8）； —？AA4-S-枢轴销，普通（开口销）（见图？9和表？9）； —？AA4-R-枢轴销，普通（环）（见图？10和表？10）； —？AT4-耳轴支架（见图？11和表？11）。 这些附件用于液压缸上，以机械方式传递缸力。这些附件的设计基于根据ISO规定的气缸内径和压力产生的最大力？3320和ISO？2944. 本文件仅适用于按照本文件制造的产品的尺寸标准；它不适用于它们的功能特征。 ？ [1]？1？酒吧？=？0,1？MPa？=？105？Pa;1？MPa？=？1？N/mm2

This document specifies the mounting dimensions required for interchangeability of accessories for 16？MPa (160？bar) compact cylinders conforming to ISO？6020？2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO？6020？2, but this does not limit their application[1]. This document covers the following accessories, identified in accordance with ISO？6099: —？AP6 — rod eye spherical, female thread (see Figure？1 and Table？1); —？AB5 — clevis bracket, spherical eye, in angle (see Figure？2 and Table？2); —？AA6-L — pivot pin, spherical bearing, locking plate (see Figure？3 and Table？3); —？AL6 — locking plate for pivot pin (see Figure？4 and Table？4); —？AP2 — rod clevis, female thread (see Figure？5 and Table？5); —？AP4 — rod eye plain, female thread (see Figure？6 and Table？6); —？AB2 — eye bracket (see Figure？7 and Table？7); —？AB4 — clevis bracket, straight (see Figure？8 and Table？8); —？AA4-S — pivot pin, plain (split pins) (see Figure？9 and Table？9); —？AA4-R — pivot pin, plain (rings) (see Figure？10 and Table？10); —？AT4 — trunnion bracket (see Figure？11 and Table？11). These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO？3320 and ISO？2944. This document only applies to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics. ？ [1]？1？bar？=？0,1？MPa？=？10⁵？Pa; 1？MPa？=？1？N/mm²