现行

BS EN ISO 28199-1-2021

Paints and varnishes. Evaluation of properties of coating systems related to the spray application process-Vocabulary and preparation of test panels
油漆和清漆 与喷涂工艺相关的涂层系统性能评估

2021-04-21

现行

BS EN 1062-7-2004

Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete-Determination of crack bridging properties
油漆和清漆 外部砌体和混凝土的涂层材料和涂层系统

2004-05-28

现行

KS M ISO 28199-1(2017 Confirm)

도료와 바니시－도장 공정과 관련된 도장 시스템의 특성 평가－제1부：관련 용어와 시험판 제작
色漆和清漆与涂覆工艺有关的涂层系统性能的评价第1部分:相关词汇和试板的制备

2012-08-20

现行

ISO 28199-1-2021

Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 1: Vocabulary and preparation of test panels
色漆和清漆与涂覆工艺有关的涂层系统性能的评定第1部分:相关词汇和试板的制备

2021-03-25

现行

KS M ISO 28199-1

도료와 바니시 — 도장 공정과 관련된 도장 시스템의 특성 평가 — 제1부: 용어와 시험판 제작
色漆和清漆.与喷涂工艺有关的涂层系统性能的评定.第1部分:词汇和试板的制备

2022-12-13

现行

BS EN ISO 28199-3-2021

Paints and varnishes. Evaluation of properties of coating systems related to the spray application process-Assessment of sagging, formation of bubbles, pinholing and hiding power
油漆和清漆 与喷涂工艺相关的涂层系统性能评估

2021-07-09

现行

DIN EN 1062-7

Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties
色漆和清漆.外部砖石和混凝土用涂层材料和涂层系统.第7部分:裂纹桥接性能的测定；德文版EN 1062-7:2004

2004-08-01

现行

UNE-EN 1062-7-2004

Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties
色漆和清漆.外部砖石和混凝土用涂层材料和涂层系统.第7部分:裂纹桥接性能的测定

2004-12-17

现行

ISO/TS 19392-5-2023

Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 5: Measurement of transmittance properties of UV protective coatings
色漆和清漆.风力涡轮机转子叶片涂层系统.第5部分:紫外线防护涂层透射率财产的测量

2023-03-10

现行

KS M ISO 28199-3(2017 Confirm)

도료와 바니시－도장 공정과 관련된 도장 시스템의 특성 평가－제3부：새깅, 기포 형성, 핀홀, 은폐력의 육안 평가
色漆和清漆与涂覆工艺有关的涂层系统性能的评定第3部分:下垂、气泡形成、针孔和遮盖力的目视评定

2012-08-20

现行

KS M ISO 28199-3

도료와 바니시 — 도장 공정과 관련된 도장 시스템의 특성 평가 — 제3부: 새깅, 기포 형성, 핀홀, 은폐력의 육안 평가
色漆和清漆.与喷涂工艺有关的涂层系统性能的评定.第3部分:流挂、气泡形成、针孔和遮盖力的评定

2022-12-13

现行

DIN EN ISO 28199-1

Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 1: Vocabulary and preparation of test panels (ISO 28199-1:2021)
色漆和清漆与喷涂工艺有关的涂层系统性能的评定第1部分:试验板的词汇和制备；德文版EN ISO 28199-1:2021

2021-07-01

现行

UNE-EN ISO 28199-1-2010

Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009)
色漆和清漆.涂覆过程相关涂层系统性能的评估.第1部分:相关词汇和试板的制备（ISO 28199-1-2009）

2010-05-12

现行

ISO/TS 19392-6-2023

Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6: Determination and evaluation of ice adhesion using centrifuge
色漆和清漆.风力涡轮机转子叶片的涂层系统.第6部分:使用离心机测定和评价结冰附着力

2023-02-10

现行

BS EN ISO 28199-2-2021

Paints and varnishes. Evaluation of properties of coating systems related to the spray application process-Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
油漆和清漆 与喷涂工艺相关的涂层系统性能评估

2021-07-08

现行

UNE-EN ISO 28199-3-2010

Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3:2009)
色漆和清漆.涂覆过程相关涂层系统性能的评估.第3部分:流挂、气泡形成、针孔和遮盖力的目视评估（ISO 28199-3-2009）

2010-05-12

现行

BS EN ISO 4628-1-2016

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance-General introduction and designation system
油漆和清漆 涂层降解的评估 缺陷数量和大小以及外观均匀变化强度的指定

2016-02-29

现行

KS M ISO 28199-2(2017 Confirm)

도료와 바니시－도장 공정과 관련된 도장 시스템의 특성 평가－제2부：색 안정성, 공정 은폐력, 재용해,과분사 흡착, 습윤, 표면 조직, 반점
色漆和清漆与涂覆工艺有关的涂层系统性能的评价第2部分:颜色稳定性、工艺遮盖力、再溶解性、过喷吸收、润湿性、表面结构和斑点

2012-08-20

现行

ISO/TS 19392-2-2018

Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm
油漆和清漆 - 风力涡轮机转子叶片的涂层系统第2部分:旋转臂耐雨侵蚀性的测定和评估

2018-05-04

现行

ISO/TS 19392-3-2018

Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 3: Determination and evaluation of resistance to rain erosion using water jet
油漆和清漆 - 风力涡轮机转子叶片的涂层系统 - 第3部分:使用水射流确定和评估抗雨侵蚀性

2018-05-04