Quartz crystal units for frequency control and selection. Part 2: Guide to the use of quartz crystal units for frequency control and selection
石英晶体频率控制和选择 - 第2部分:使用指南的石英晶体频率控制和选择

1983-01-01

频率控制和选择用石英晶体元件 第二部分：频率控制和选择用石英晶体元件使用指南
Quartz crystal units for frequency control and selection--Part 2: Guide to the use of quartz crystal units for frequency control and selection

1988-01-06

Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection - Section One: Quartz crystal units for microprocessor clock supply
用于频率控制和选择的石英晶体单元 - 第2部分:用于频率控制和选择的石英晶体单元使用指南 - 第一部分:用于微处理器时钟供应的石英晶体单元

1991-07-22

Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; identical with IEC 60122-2:1983
用于频率控制和选择的石英晶体单元；第2部分:用于频率控制和选择的石英晶体单元的使用指南；与IEC 60122-2:1983相同

1993-09-01

주파수 제어 및 선택용 수정진동자－제2부：주파수 제어 및 선택용 수정진동자 사용 안내서－제1장：마이크로프로세서 클럭 신호 공급용 수정진동자
频率控制和选择用石英晶体器件第2部分:频率控制和选择用石英晶体器件使用指南第一节:微处理器时钟电源用石英晶体器件

2011-12-30

주파수 제어 및 선택용 수정진동자－제2부：주파수 제어 및 선택용 수정진동자 사용 안내서－제1장：마이크로프로세서 클럭 신호 공급용 수정진동자
频率控制和选择用石英晶体元件第2部分:频率控制和选择用石英晶体元件使用指南第一节:微处理器时钟电源用石英晶体元件

2011-12-30

Amendment 1 - Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection - Section One: Quartz crystal units for microprocessor clock supply
修改件1.频率控制和选择用石英晶体元件.第2部分:频率控制和选择用石英晶体元件的使用指南.第1节:微处理器时钟电源用石英晶体元件

1993-09-06

검증된 품질의 수정 제어 발진기 ― 제2부: 수정 제어 발진기의 사용 안내
石英晶体振荡器 第2部分:使用石英晶体振荡器的指南

2018-11-08

石英晶体振荡器 第二部分：石英晶体振荡器使用指南
Quartz crystal controlled oscillators--Part 2: Guide to the use of quartz crystal controlled oscillators

1988-01-06

Quartz crystal controlled oscillators - Part 2: Guide to the use of quartz crystal controlled oscillators
石英晶体振荡器 第2部分:使用石英晶体振荡器的指南

1981-01-01

검증된 품질의 수정 제어 발진기 ― 제2부: 수정 제어 발진기의 사용 안내
石英晶体振荡器.第2部分:石英晶体振荡器的使用指南

2018-11-08

频率控制和选择用石英晶体元件 第三部分：标准外形及插脚连接
Quart crystal units for frequency control and selection--Part 3: Standard outlines and pin connections

1988-01-06

Quartz crystal units for frequency control and selection; part 3: standard outlines and lead connections; identical with IEC 60122-3:1977 (status as of 1991)
用于频率控制和选择的石英晶体单元；第3部分:标准轮廓和引线连接；与IEC 60122-3:1977相同（截至1991年的状态）

1993-09-01

频率控制与选择用压电和介电器件 术语 第4-1部分-材料 人造石英晶体
Piezoelectric and dielectric devices for frequency control and selection-Glossary-Part 4-1: Piezoelectric materials - Synthetic quartz crystal

2019-11-11

Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal
频率控制、选择和检测用压电、介电和静电器件及相关材料术语第4-1部分:压电材料合成石英晶体

2018-11-16

Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal
频率控制、选择和检测用压电、介电和静电器件及相关材料术语第4-1部分:压电材料合成石英晶体

2018-11-16

IEC 61994-4-1. Piezoelectric and dielectric devices for frequency control and selection. Glossary. Part 4-1. Piezoelectric materials. Synthetic quartz crystal
IEC 61994-4-1 用于频率控制和选择的压电和介电设备 术语汇编第4-1部分 压电材料 人造石英晶体

2006-01-10

Draft Document - Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal (IEC 49/756/CD:2006)
文件草稿.频率控制和选择用压电和介电设备.术语表.第4-1部分:压电材料.合成石英晶体（IEC 49/756/CD:2006）

2006-06-01

Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用冷焊密封石英晶体元件详细规范 DN 47 U/2 DQ和DP外壳 17至75 MHz频率范围 第三泛音厚度剪切模式 切割时 用于宽温度范围（非温度控制）的操作 全面评估水平

1977-10-15

Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用冷焊密封石英晶体元件详细规范 DN、47 U/2、DQ和DP外壳 频率范围为0.8至20 MHz和3.0至30 MHz 基本厚度剪切模式 切割时 适用于宽温度范围（非温度控制）的操作 全速

1977-10-15