本文件规定了试样的制备方法以及用于测定甲基丙烯酸甲酯-丙烯腈-丁二烯-苯乙烯（MABS）模塑和挤出材料性能的试验方法。它给出了处理试验材料和在成型前调节试验材料和试验前调节试样的要求。本文件给出了制备试样的程序和条件，以及制备试样所用材料性能的测量程序。它列出了特性和测试方法，这些特性和测试方法是适合和必要的，以表征MABS模塑和挤出材料。性能选自ISO 10350-1中的一般试验方法。本文件还包括广泛用于或对这些模塑和挤压材料特别重要的其他试验方法，以及ISO 19066-1中规定的指定性能。方法对于试样制备和调节，使用本文件中规定的试样尺寸和试验程序，以获得可重复和可比的试验结果。测定的值并不总是与使用不同尺寸试样或使用不同程序制备的值相同。

This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials. It gives the requirements for handling the test material and for conditioning both the test material before moulding and the specimens before testing. This document gives procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made. It lists properties and test methods which are suitable and necessary to characterize MABS moulding and extrusion materials. The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for, or of particular significance to, these moulding and extrusion materials are also included in this document, as are the designatory properties specified in ISO 19066-1. The methods of specimen preparation and conditioning, the specimen dimensions and the test procedures specified in this document are used in order to obtain reproducible and comparable test results. Values determined are not always identical to those obtained using specimens of different dimensions or prepared using different procedures.