IEC 62841-1:20 14涉及电动机操作或磁力驱动的安全性: -手持工具(IEC 62841-2)； -可运输工具(IEC 62841-3)； -草坪和花园机械（IEC 62841-4）。以上列出的类别在下文中被称为“工具”或“机器”。单相交流的额定电压不大于250 V。或者华盛顿。工具和480 V三相交流电。工具。额定输入不大于3 700 W。K.1和L.1中给出了本标准对电池工具的适用性限值。本标准涉及所有人员在正常使用和合理可预见的误用工具时遇到的工具带来的危害。 带有电加热元件的工具属于本标准的范围。手持式电动工具，可安装在支架或工作台上作为固定工具使用，而无需对工具本身进行任何改动，均属于本标准的范围，且这种手-保持的工具和支撑件被认为是可运输的工具，因此被相关部件3覆盖。本标准计划取消并取代2006年发布的IEC 60745-1第四版、1990年发布的IEC 61029-1第一版和2010年发布的IEC 60335-1第五版，仅涉及草坪和园林机械的要求。后者的出版物在被撤回之前一直有效。本标准构成技术性修订。与IEC 60745-1第四版相比，本版本包括以下重大技术变更: -引入或修改的各种条款中的要求，以包括可运输工具以及草坪和花园机械的要求（以前由IEC 61029-1和IEC 60335涵盖-1); -泄漏电流测试和电气强度测试由原第13和15条移至附录C和D； -原第29、30及31条重新编号为第6、13及15条； -第18条增加了对电子安全关键功能的要求； -有关开关的规定经修订并由附件I移至第23条； -对第9、19和13条中添加的软材料（弹性体）的澄清； -IEC 60745-1的图1中的测试指和IEC 60745-1的图2中的测试探针被基本IEC标准的引用所取代； -附件K和L中增加了锂离子电池系统的要求，附件M被删除。 关键词:工具，电动，手持，可运输，草坪和花园 2014年5月更正的内容已纳入本副本。

IEC 62841-1:2014 deals with the safety of electric motor-operated or magnetically driven:
- hand-held tools (IEC 62841-2);
- transportable tools (IEC 62841-3);
- lawn and garden machinery (IEC 62841-4). The above listed categories are hereinafter referred to as "tools" or "machines". The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Tools with electric heating elements are within the scope of this standard. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This standard is scheduled to cancel and replace the fourth edition of IEC 60745-1, published in 2006, the first edition of IEC 61029-1, published in 1990, and the fifth edition of IEC 60335-1, published in 2010, only with respect to requirements concerning lawn and garden machinery. The latter publications remain valid until they are withdrawn. This standard constitutes a technical revision. This edition includes the following significant technical changes with respect to the fourth edition of IEC 60745-1:
- requirements in various clauses introduced or modified in order to include the requirements for transportable tools and lawn and garden machinery (formerly covered by IEC 61029-1 and IEC 60335-1);
- leakage current test and electric strength test moved from former Clauses 13 and 15 to Annexes C and D;
- former Clauses 29, 30 and 31 renumbered to become Clauses 6, 13 and 15;
- requirements for electronic safety critical functions added to Clause 18;
- requirements for switches revised and moved from Annex I to Clause 23;
- clarifications in respect to soft materials (elastomers) added to Clauses 9, 19 and 13;
- test finger in Figure 1 of IEC 60745-1 and test probe in Figure 2 of IEC 60745-1 replaced by references to basic IEC standards;
- requirements for Li-Ion battery systems added to Annexes K and L and Annex M was removed. Key words: Tools, Electric-Motor-Operated, Hand held, Transportable, Lawn and Garden The contents of the corrigendum of May 2014 have been included in this copy.