范围:IEC 60966的本部分规定了在横向电磁模式（TEM）下工作的射频同轴电缆组件的要求，并建立了测试由电缆和连接器组成的射频同轴电缆组件的电气、机械和环境性能的一般要求。相关分规范中给出了与电缆组件特定系列相关的附加要求。 所用电缆和连接器的设计最好分别符合IEC 61196和IEC 61169的适用部分。 注1:本文件不包括通常在电缆和连接器上进行的测试 分别地IEC 61196中描述了这些试验- 1（所有部分）和IEC 61169-1。 注2:在可能的情况下，电缆组件中使用的电缆和连接器，即使IEC 61196或IEC 61169系列中未对其进行描述，也应根据相关通用规范中给出的测试进行单独测试。 注3:如果对电缆组件进行了额外保护，则应进行机械和环境试验 本文件中所述内容均适用。交叉引用:IEC 62153-4-7:2015IEC 61169-1IEC 61169-IEC 62153-4-7IEC 60068-2-11IEC 60966-3（所有部分）IEC 61196IEC 62153-4-6IEC 60068-2-68IEC 60332-1-2IEC 61169（所有部分）IEC 60068IEC 60529IEC 60512-2IEC 60512-2-2IEC 60068-2-27IEC 60068-2-42IEC 60068-2-14IEC 60068-2-6IEC 61196-1-11962037-2IEC 6006- 3IEC 60966-2IEC 60966-4（所有部分）IEC 60068-2-78IEC 60966-4IEC 60966-2（所有部分）IEC 61169-1:2013IEC 60332-1-2:2004ISO 9002ISO 9000IEC 60339（所有部分）IEC 61196-1-324ISO/IEC TR 29106ISO 9001:2015购买本文件时可提供的所有当前修订。

Scope: This part of IEC 60966 specifies requirements for radio frequency coaxial cable assemblies operating in the transverse electromagnetic mode (TEM) and establishes general requirements for testing the electrical, mechanical and environmental properties of radio frequency coaxial cable assemblies composed of cables and connectors. Additional requirements relating to specific families of cable assemblies are given in the relevant sectional specifications. The design of the cables and connectors used will preferably conform to the applicable parts of IEC 61196 and IEC 61169 respectively. NOTE 1 This document does not include tests which are normally performed on the cables and connectors separately. These tests are described in IEC 61196-1 (all parts) and IEC 61169-1 respectively. NOTE 2 Wherever possible, cables and connectors used in cable assemblies, even if they are not described in the IEC 61196 or IEC 61169 series, are tested separately according to the tests given in the relevant generic specification. NOTE 3 Where additional protection is applied to a cable assembly, the mechanical and environmental tests described in this document are applicable.Cross References:IEC 62153-4-7:2015IEC 61169-1IEC 61169IEC 62153-4-7IEC 60068-2-11IEC 60966-3 (all parts)IEC 61196 (all parts)IEC 61196IEC 62153-4-6IEC 60068-2-68IEC 60332-1-2IEC 61169 (all parts)IEC 60068IEC 60529IEC 60512-7-2IEC 60512-6-2IEC 60068-2-27IEC 60068-2-42IEC 60068-2-14IEC 60068-2-6IEC 61196-1-119IEC 62037-2IEC 60068 (all parts)IEC 60966-3IEC 60966-2IEC 60966-4 (all parts)IEC 60068-2-78IEC 60966-4IEC 60966-2 (all parts)IEC 61169-1:2013IEC 60332-1-2:2004ISO 9002ISO 9000IEC 60339 (all parts)IEC 61196-1-324ISO/IEC TR 29106ISO 9001:2015All current amendments available at time of purchase are included with the purchase of this document.