IEC 61952的本部分适用于标称电压大于1000 V、频率不大于100 Hz的交流架空线路用复合线路支柱绝缘子。 它也适用于变电站或电力牵引线上使用的类似设计的线路支柱绝缘子。 本文件适用于复合型线路支柱绝缘子，通常带有金属联轴器，带或不带底板。当用于复杂结构时，它也适用于此类绝缘子。它不适用于适合用作线路支柱绝缘子的空心绝缘子。 本文件的目的是规定复合线路支柱绝缘子上使用的联轴器的主要尺寸，以便组装不同制造商提供的绝缘子或配件，并在可行的情况下与现有装置互换。 它还规定了复合线路支柱绝缘子的标准命名系统。 交叉引用:IEC 60050-471IEC 60071-1EN 60071-1IEC 61952:2008EN 61952:2008IEC 60720ANSI C.29.17-2013购买本文件时可使用的所有现行修订版均包含在购买本文件中。

This part of IEC 61952 is applicable to composite line post insulators for AC overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to line post insulators of similar design used in substations or on electric traction lines. This document applies to line post insulators of composite type, generally with metallic couplings, with and without a base plate. It also applies to such insulators when used in complex structures. It does not apply to hollow insulators adapted for use as line post insulators. The object of this document is to specify the main dimensions of the couplings to be used on the composite line post insulators in order to permit the assembly of insulators or fittings supplied by different manufacturers and to allow, whenever practical, interchangeability with existing installations. It also specifies a standard designation system for composite line post insulators.Cross References:IEC 60050-471IEC 60071-1EN 60071-1IEC 61952:2008EN 61952:2008IEC 60720ANSI C.29.17-2013All current amendments available at time of purchase are included with the purchase of this document.