BS 7291-4:1990-家用冷热水和建筑物供暖装置用热塑性塑料管及相关配件氯化聚氯乙烯（PVC-C）管及相关配件和溶剂粘合剂规范-国家数字标准馆

现行 BS 7291-4:1990

到馆阅读

收藏跟踪

购买正版

Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings-Specification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement 家用冷热水和建筑物供暖装置用热塑性塑料管及相关配件氯化聚氯乙烯（PVC-C）管及相关配件和溶剂粘合剂规范

发布日期： 1990-05-31

塑料管标准化公制尺寸的外径为12 mm至63 mm的氯化聚氯乙烯材料和管道的要求和试验条件。它给出了涉及PVC-C管道的相关配件和组件的性能要求，包括胶结接头。交叉引用:BS 864BS 871BS 2494BS 2782:方法1101ABS 2782:方法1102A:BS 2782:方法1102BS 2782:方法1103ABS 2782:方法1106ABS 2782:方法1108ABS 4346BS 4728BS 5214:部分2BS 5556BS 5750:部分5BS 5955:部分8BS 7291:部分1BS 7291:部分2BS 7291:部分3ISO 1043-1

Requirements and test conditions for chlorinated polyvinyl chloride materials and pipes of 12 mm to 63 mm outside diameter in metric sizes standardized for plastics pipes. It gives performance requirements for associated fittings and assemblies involving PVC-C pipes, including cemented joints.Cross References:BS 864BS 871BS 2494BS 2782:Method 1101ABS 2782:Method 1102A: BS 2782:Method 1102BBS 2782:Method 1103ABS 2782:Method 1106ABS 2782:Method 1108ABS 4346BS 4728BS 5214:Part 2BS 5556BS 5750:Part 5BS 5955:Part 8BS 7291:Part 1BS 7291:Part 2BS 7291:Part 3ISO 1043-1

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

UNE-EN 12295-2000

PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPES AND ASSOCIATED FITTINGS FOR HOT AND COLD WATER. TEST METHOD FOR RESISTANCE OF JOINTS TO PRESSURE CYCLING
塑料管道系统冷热水用热塑性塑料管及相关配件接头耐压力循环的试验方法

BS 05/30127626 DC

ISO/DIS 19892. Plastics piping systems. Thermoplastics pipes and associated fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
ISO/DIS 19892 塑料管道系统冷热水用热塑性塑料管及相关配件接头耐压力循环的试验方法

Plastics pipework (thermoplastics materials)-Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
塑料管道工程（热塑性材料）

Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
塑料管道系统——冷热水用热塑性塑料管和配件——接头耐压力循环的试验方法

BS EN ISO 19892-2018

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
塑料管道系统冷热水用热塑性塑料管及配件接头耐压力循环的试验方法

BS ISO 19892-2011

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
塑料管道系统冷热水用热塑性塑料管及配件接头耐压力循环的试验方法

GOST R ISO 19892-2021

Трубопроводы из пластмасс. Трубы и фитинги из термопластов для горячей и холодной воды. Метод испытания соединений на стойкость к циклическому изменению давления
塑料管道系统冷热水用热塑性塑料管和配件接头耐压力循环的试验方法

Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of mounted assemblies to temperature cycling
塑料管道系统——冷热水用热塑性塑料管和配件——安装组件耐温度循环的试验方法

BS EN ISO 19893-2018

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
塑料管道系统冷热水用热塑性塑料管及配件安装组件耐温度循环的试验方法

BS ISO 19893-2011

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
塑料管道系统冷热水用热塑性塑料管及配件安装组件耐温度循环的试验方法

UNE-EN 12293-2000

PLASTIC PIPING SYSTEMS - THERMOPLASTICS PIPES AND FITTINGS FOR HOT AND COLD WATER - TEST METHOD FOR THE RESISTANCE OF MOUNTED ASSEMBLIES TO TEMPERATURE CYCLING
塑料管道系统.冷热水用热塑性塑料管和配件.安装组件耐温度循环的试验方法

GB/T 19993-2005

冷热水用热塑性塑料管道系统管材管件组合系统热循环试验方法
Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling

GOST R ISO 19893-2021

Трубопроводы из пластмасс. Трубы и фитинги из термопластов для горячей и холодной воды. Метод испытания узлов в сборе на стойкость к циклическому изменению температуры
塑料管道系统热塑性塑料用于冷热水的管道和配件安装组件对温度循环的阻力的测试方法

DIN EN ISO 19892

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
塑料管道系统.冷热水用热塑性塑料管和配件.接头耐压力循环的试验方法（ISO 19892-2011）

DIN EN ISO 19893

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
塑料管道系统.冷热水用热塑性塑料管和配件.安装组件耐温度循环的试验方法（ISO 19893-2011）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统