钨极惰性气体保护焊工艺方法
Welding procedure specification for gas tungsten arc welding

1999-06-24

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 7/8 INCH, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
3/16至7/8英寸碳钢（M-1/P-1 第1组或第2组）焊态钨极气体保护焊标准焊接工艺规范（WPS） 带或不带衬垫

1989-12-18

STANDARD WELDING PROCEDURE SPECIFICATION(WPS) FOR; GAS TUNGSTEN ARC WELDISTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER309(L), AS-WELDED
标准焊接工艺规范（WPS）；钨极气体保护焊1/16至1-1/2英寸厚ER309（L）焊态奥氏体不锈钢（M-8/P-8/S-8 1组）与碳钢（M-1/P-1/S-1 1或2组）的钨极气体保护焊标准焊接工艺规范（SWPS）

2002-08-28

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Galvanized Steel (M-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号镀锌钢（M-1）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

2002-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Aluminum, (M-22 or P-22), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下 带或不带衬垫的10至18号铝（M-22或P-22）气体保护钨极电弧焊的标准焊接工艺规范

1991-01-01

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的钨极气体保护焊标准焊接工艺规范（WPS） 厚 ER3XX 焊接状态 主要用于管道应用

2001-10-31

Standard Welding Procedure Spec (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS） 厚 ER3XX ER3XX-XX 焊接状态 主要用于管道应用

2001-03-01

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E801
1/8至1/2英寸铬钼钢（M-4/P-4 第1组或第2组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS） 厚度 焊接状态 焊接状态 1/8至1-1/2英寸 厚度 焊后热处理条件 ER80S-B2和E801

1999-01-01

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E801
1/8至1/2英寸铬钼钢（M-4/P-4 第1组或第2组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS） 厚度 焊接状态 焊接状态 1/8至1-1/2英寸 厚度 焊后热处理条件 ER80S-B2和E801

1999-01-01

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Aluminum (M/P/S-22 to M/P/S-22), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号铝（M/P/S-22至M/P/S-22）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

2010-07-07

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Aluminum (M/P/S-22 to M/P/S-22), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号铝（M/P/S-22至M/P/S-22）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

2010-07-07

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号奥氏体不锈钢（M-8、P-8或S-8）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

2002-01-01

Standard Welding Procedure Sspecification (WPS) for; Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, group 1 or 2), 1/8 through 1-1/2" think, ER70S-2, as-Welded or PWHT Ccondition (primarily pipe applications)
标准焊接工艺规范（WPS）；碳钢的钨极气体保护焊（M-1/P-1/S-1 第1组或第2组） 1/8至1-1/2英寸 ER70S-2 焊前或焊后热处理条件（主要是管道应用）

2019-03-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing
3/16至7/8英寸碳钢（M-1/P-1 第1组或第2组）在焊接状态下 带或不带衬垫的钨极气体保护焊的标准焊接工艺规范

1990-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing
3/16至7/8英寸碳钢（M-1/P-1 第1组或第2组）在焊接状态下 带或不带衬垫的钨极气体保护焊的标准焊接工艺规范

1990-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Carbon Steel to Austenic Stainless Steel, (M-1 to M-8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
在焊态条件下 带或不带衬垫的10至18 Gauge碳钢至奥氏体不锈钢（M-1至M-8或P-8）的钨极气体保护焊标准焊接工艺规范

1990-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

2001-10-31

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

2001-10-31

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium- Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications
ER80S-B2 1/8至1/2英寸铬钼钢（M-4/P-4 1或2组）的钨极气体保护焊标准焊接工艺规范（WPS） 厚度 焊接状态 1/8至3/4英寸 厚 焊后热处理条件 主要用于管道应用

1999-12-08

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
1/8至1-1/2英寸厚的焊态奥氏体不锈钢（M-8/P-8/S-8 第1组）的钨极气体保护焊标准焊接工艺规范

2001-01-01