1.1 本规范提供了测量和评估人造房屋中木材与木材结构或半结构粘合用粘合剂性能的方法。本规范中使用的木材包括木材、胶合板、刨花板、石膏板以及所有在粘合线上具有木质表面的材料。本规范不包括制造房屋中使用的其他粘合剂，如地毯、地砖、陶瓷固定装置、塑料层压板、装饰和木制品以及类似非结构应用的粘合剂。 1.1.1 粘合剂的性能通过以下测试进行测量: 数字 测验 部分 1. 低温 16 2. 干木材 17 3. 间隙填充 18 4. 高温 19 5. 类型3资格 20 6. 2类资质 21 7. 老化，薄膜氧化 22 8. 老化、键氧化 23 9 抗变形、蠕变 24 10 模具 25 11 类型1资格 26 1.2 以英寸磅为单位的数值应视为标准。括号中给出的值是国际单位制的数学转换，仅供参考，不被视为标准。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification provides the means to measure and evaluate the performance of adhesives for structural or semi-structural bonding of wood-to-wood in manufactured homes. Wood as used in this specification includes lumber, plywood, particleboard, gypsum board, and all materials having wood-based surfaces at the bondline. This specification does not cover other adhesives used in manufactured homes such as adhesives for carpet, floor tile, ceramic fixtures, plastic laminates, trim and millwork, and similar nonstructural applications. 1.1.1 The performance of the adhesives is measured in the following tests: Number Test Section 1 Low Temperature 16 2 Dry Lumber 17 3 Gap-Filling 18 4 High Temperature 19 5 Type 3 Qualification 20 6 Type 2 Qualification 21 7 Aging, Film Oxidation 22 8 Aging, Bond Oxidation 23 9 Resistance to Deformation, Creep 24 10 Mold 25 11 Type 1 Qualification 26 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.