ISO 8283-1:1991-塑料管道和配件——建筑物内排放系统的插座和插口尺寸第1部分:未增塑聚氯乙烯（PVC-U）和氯化聚氯乙烯（PVC-C） -国家数字标准馆

现行 ISO 8283-1:1991

到馆阅读

收藏跟踪

购买正版

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) 塑料管道和配件——建筑物内排放系统的插座和插口尺寸第1部分:未增塑聚氯乙烯（PVC-U）和氯化聚氯乙烯（PVC-C）

发布日期： 1991-05-02

建立插座的分类和命名系统，并规定这些插座和接头插口的设计公式和衍生尺寸以及公差。附录A和B构成本标准不可分割的一部分。

Establishes a classification and designation system for sockets and specifies the design formulae and the derived dimensions, together with tolerances, of these sockets and of spigots for joints. Annexes A and B form an integral part of this standard.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.040.45管道部件和管道 - 塑料配件、 23.040.20管道部件和管道 - 塑料管、 91.140.80建筑物中的设施 - 排水系统

关联关系

研制信息

归口单位： ISO/TC 138/SC 1

相似标准/计划/法规

ISO 8283-3-1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)
塑料管道和配件——建筑物内排放系统的插座和插口尺寸第3部分:聚丙烯（PP）

ISO 8283-2-1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)
塑料管道和配件——建筑物内排放系统的插座和插口尺寸第2部分:聚乙烯（PE）

ISO 8283-4-1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
塑料管道和配件——建筑物内排放系统的插座和插口尺寸第4部分:丙烯腈/丁二烯/苯乙烯（ABS）

BS EN 1124-3-2008

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems-System X. Dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件

BS EN 1124-2-2014

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems-System S, forms and dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件系统结构、形式和尺寸

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
废水系统用带插口和套筒的纵向焊接不锈钢管和配件.第3部分:系统X.尺寸；德文版EN 1124-3:2008

UNE-EN 1124-3-2009

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
废水系统用带插口和套筒的纵向焊接不锈钢管和配件.第3部分:系统X.尺寸

UNE-EN 1124-2-2008

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件.第2部分:系统S；尺寸

BS 06/30158977 DC

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 3. System X. Dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件第三部分系统X.尺寸

BS EN 1123-2-2006+A1-2007

Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems-Dimensions
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和管件

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件.第2部分:系统、形式和尺寸；德文版EN 1124-2:2014

UNE-EN 1123-2-2007+A1-2007

Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和配件.第2部分:尺寸

BS ISO 7432-2021

Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
玻璃纤维增强热固性塑料（GRP）管道和配件用弹性密封件证明锁紧承插接头（包括双承插接头）设计的试验方法

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
玻璃增强热固性塑料（GRP）管道和配件 - 用于证明锁定插座和插口接头（包括双插座接头）与弹性密封件的设计的测试方法

BS 06/30151317 DC

BS EN 1124-2. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 2. System S. Dimensions
英国标准EN 1124-2 废水系统用带插口和插座的纵向焊接不锈钢管和配件第二部分系统S.尺寸

BS EN 1123-3-2004

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems-Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和管件

Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions (includes Amendment A1:2007)
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和配件.第2部分:尺寸；德文版EN 1123-2:2006+A1:2007

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in shipbuilding
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和管件.第3部分:真空排水系统和造船排水系统的尺寸和特殊要求；德文版EN 1123-3:2004

UNE-EN 1123-3-2007

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和配件第3部分:真空排水系统和造船排水系统的尺寸和特殊要求

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统