Материалы шлифовальные из электрокорунда. Методы определения химического состава
氧化铝磨粒 化学成分试验方法

연마재 — 용융알루미나질의 화학 분석 방법
磨粒和原油 - 熔融氧化铝的化学分析

2013-12-19

연마재 — 용융알루미나질의 화학 분석 방법
磨料和粗磨料熔融氧化铝的化学分析

2013-12-19

Abrasive grains and crude. Chemical analysis of fused aluminium oxide
磨料颗粒和原油 熔融氧化铝的化学分析

1997-06-15

Abrasive grains and crude — Chemical analysis of fused aluminium oxide
磨粒和粗粉煤灰；熔融氧化铝的化学分析

1997-01-22

Материалы шлифовальные из карбида бора. Технические условия
碳化硼磨粒 规格

Abrasive grains and crude - Chemical analysis of fused aluminium oxide (ISO 9285:1997)
磨粒和粗磨粒.熔融氧化铝的化学分析（ISO 9285-1997）

1998-01-01

Aluminium and aluminium alloy - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
铝和铝合金.阳极氧化.第10部分:用磨料喷射试验装置测量阳极氧化涂层的平均比耐磨性；德文版EN 12373-10:1998

1999-03-01

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 10: MEASUREMENT OF MEAN SPECIFIC ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS USING AN ABRASIVE JET TEST APPARATUS.
铝和铝合金 阳极氧化 第10部分:使用磨料喷射试验装置测量阳极氧化涂层的平均比耐磨性

2000-01-21

高铝粉煤灰提取氧化铝技术规范
Technical specifications for extraction of aluminium oxide from high-alumina fly ash

2020-10-11

도료와 관련제품의 도장 전 강판기재의 준비-비금속 블라스트 세정용 연마제의 시방-제7부:용융 알루미늄 옥사이드
涂装油漆和相关产品前钢基体的制备？非金属喷砂清理磨料规范？第7部分:熔融氧化铝

2002-12-31

도료 및 관련 제품의 도장 전 철강 소지 표면처리 — 비금속 블라스트 세정 연마재 시방 — 제7부: 용융 산화알루미늄
涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料规范.第7部分:熔融氧化铝

2021-04-26

涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分：熔融氧化铝
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide

2017-12-29

Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide
应用涂料及相关产品前的钢基材的制备 - 非金属喷砂清理剂的规格 - 第7部分:熔融氧化铝

2018-08-24

PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINT AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 7: FUSED ALUMINIUM OXIDE (ISO 11126-7:1995)
涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料规范第7部分:熔融氧化铝

2000-02-28

Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和沉淀处理）螺母、联轴器和空心机加工零件用六角棒规范（无周边和不对称粗晶）（平面宽度不小于14 mm 也不大于36 mm）（Cu 4.4 Mg 0.5

1971-08-31