Welding consumables. Test methods and quality requirements. Part 3: Conformity assesment of wire electrodes, wires and rods for welding of aluminium alloys
焊接耗材 试验方法和质量要求 第3部分:铝合金焊接用焊丝、焊丝和焊条的合格评定

2006-03-29

Материалы сварочные. Методы испытаний. Часть 3. Классификационные испытания сварочных материалов по положению сварки и глубине проплавления корня углового шва
焊接耗材测试方法 第3部分:角焊缝焊接消耗品的位置容量和根部穿透分类测试

Welding consumables — Test methods — Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
焊接耗材——试验方法第3部分:角焊缝中焊接耗材位置能力和根部熔深的分类试验

2011-05-05

Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
焊接耗材.试验方法和质量要求.第1部分:钢、镍和镍合金用耗材的主要方法和合格评定；德文版EN 14532-1:2004

2005-02-01

Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys
焊接耗材.试验方法和质量要求.第2部分:钢、镍和镍合金用耗材的补充方法和合格评定；德文版EN 14532-2:2004

2005-02-01

Welding consumables. Test methods and quality requirements. Part 1: Primary methods and conformity assesment of consumables for steel, nickel and nickel alloys
焊接耗材 试验方法和质量要求 第1部分:钢、镍和镍合金耗材的主要方法和合格评定

2006-02-15

Welding consumables. Test methods and quality requirements. Part 2: Supplementary methods and conformity assesment of consumables for steel, nickel and nickel alloys
焊接耗材 试验方法和质量要求 第2部分:钢、镍和镍合金耗材的补充方法和合格评定

2005-12-07

Welding consumables. Test methods and quality requirements-Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
焊接耗材 试验方法和质量要求 钢、镍和镍合金耗材的主要方法和合格评定

2004-12-07

焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验
Test methods for welding consumables—Part 3:Preparation and testing of a fillet weld specimens for T-joint

2023-11-27

Welding consumables. Test methods and quality requirements-Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys
焊接耗材 试验方法和质量要求 钢、镍和镍合金耗材的补充方法和合格评定

2004-12-07

Welding consumables. Test methods and quality requirements-Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
焊接耗材 试验方法和质量要求 铝合金焊接用焊丝、焊丝和焊条的合格评定

2005-01-13

Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld (ISO 15792-3:2000 including Cor 1:2006)
焊接耗材试验方法第3部分:角焊缝中焊接耗材的定位能力和根部熔透的分类试验

2009-07-29

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
环境空气质量.测定气体和蒸汽浓度用扩散取样器.要求和试验方法.第3部分:选择、使用和维护指南

2004-09-03

Качество атмосферного воздуха. Диффузионные пробоотборники, используемые при определении содержания газов и паров. Требования и методы испытаний. Часть 3. Руководство по выбору, использованию и техническому обслуживанию
环境空气质量 用于测定气体和蒸汽浓度的扩散取样器 要求和测试方法 第3部分选择 使用和维护指南