现行

SJ/T 10215-1991

磁性氧化物粉末松装密度的测定-振动漏斗法
Determination of density for magnetic oxide powders--Determination of apparent density, Oscillating funnel method

1991-05-28

现行

BS 4140-10-1986

Methods of test for aluminium oxide-Determination of untamped density
氧化铝的试验方法

1986-01-31

现行

BS 4140-8-1986

Methods of test for aluminium oxide-Determination of absolute density using a pyknometer
氧化铝的试验方法

1986-01-31

现行

ISO 18842-2015

Aluminium oxide primarily used for the production of aluminium — Method for the determination of tapped and untapped density
主要用于生产铝的氧化铝 - 测定轻敲和未开发密度的方法

2015-08-10

现行

BS ISO 18842-2015

Aluminium oxide primarily used for the production of aluminium. Method for the determination of tapped and untapped density
主要用于生产铝的氧化铝 挖掘和未挖掘密度的测定方法

2015-08-31

现行

ASTM C1770-21

Standard Test Method for Determination of Loose and Tapped Bulk Densities of Small Quantities of Plutonium Oxide
标准试验方法测定少量氧化钚的松散和抽头体积密度

2021-01-01

现行

YS/T 1057-2015

四氧化三钴化学分析方法　磁性异物含量测定　磁选分离-电感耦合等离子体发射光谱法
Methods for chemical analysis of cobaltosic oxide—Determination of magnetic impurities content—Magnetic separation-Inductively coupled plasma atomic emission spectrometry

2015-04-30

现行

JIS H 8688-2013

Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings
铝及铝合金阳极氧化阳极氧化膜单位面积质量（表面密度）的测定

2013-01-01

现行

ASTM D5017-24

Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
用碳-13核磁共振法测定线性低密度聚乙烯（LLDPE）成分的标准试验方法

2024-08-01

现行

KS D 8310(2021 Confirm)

알루미늄 및 알루미늄합금의 양극 산화 피막 두께 및 피막 무게 측정 방법
铝及铝合金阳极氧化阳极氧化膜单位面积质量（表面密度）的测定（重量法）和阳极氧化膜厚度的测定（分束显微镜无损测量）

2001-12-28

现行

KS D 8310(2016 Confirm)

알루미늄 및 알루미늄합금의 양극 산화 피막 두께 및 피막 무게 측정 방법
铝及铝合金阳极氧化阳极氧化膜单位面积质量（表面密度）的测定（重量法）和阳极氧化膜厚度的测定（分光显微镜无损测量）

2001-12-28

现行

BS EN ISO 2106-2020

Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
铝及其合金的阳极氧化 阳极氧化涂层单位面积质量（表面密度）的测定 重量分析法

2020-01-23

现行

ISO 2106-2019

Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method
铝及其合金的阳极氧化 - 阳极氧化涂层单位面积质量（表面密度）的测定 - 重量法

2019-11-29

现行

DIN EN 12373-2

Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
铝和铝合金.阳极氧化.第2部分:阳极氧化涂层单位面积质量（表面密度）的测定.重量法；德文版EN 12373-2:1998

1999-02-01

现行

UNE-EN 12373-2-1999

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 2: DETERMINATION OF MASS PER UNIT AREA (SURFACE DENSITY) OF ANODIC OXIDATION COATINGS - GRAVIMETRIC METHOD.
铝和铝合金 阳极氧化 第2部分:阳极氧化涂层单位面积质量（表面密度）的测定.重量法

1999-05-31

现行

DIN 53383-2

Testing of plastics; testing of oxidation stability by means of ageing in an oven; polyethylene of high density (PE-HD), infra red spectroscopic (IR) determination of the carbonyle content
塑料测试；通过在烘箱中老化来测试氧化稳定性；高密度聚乙烯（PE-HD）中羰基含量的红外光谱（IR）测定

1983-06-01

现行

BS 5688-21-1979

Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use-Determination of bulk density of sodium perborates
工业用原硼酸、三氧化二硼、四硼酸二钠、过硼酸钠和粗硼酸钠的试验方法

1979-02-28