1.1 本规程涵盖袋装、纸箱、柔性中间散装容器（FIBC）或其他非散装包装中装运的包装炭黑的取样。 注1: 对通过本规程获得的样品进行的测试应由生产商和消费者确定。用于测试炭黑的适当ASTM方法中描述了每种测试方法的具体细节。 1.2 以国际单位制表示的数值应视为标准。括号中的值仅供参考。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 本规程用于从装运的包装中获取具有代表性的炭黑样品。这些样本用于确定货物的平均质量或可变性。

1.1 This practice covers the sampling of packaged carbon blacks for shipment in bags, cartons, flexible intermediate bulk containers (FIBC), or other non-bulk packages. Note 1: The tests to be made on the samples obtained by this practice shall be determined by the producer and the consumer. The specific details of each test method are described in appropriate ASTM methods used for testing carbon black. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 This practice is for use in obtaining representative samples of carbon black from the packages in the shipment. These samples are used to determine the average quality or variability of the shipment.