首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 SAE ARP1469
到馆提醒
收藏跟踪
购买正版
Restraint Device for Infants 婴儿约束装置
发布日期: 2002-12-16
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
SAE ARP766A
RESTRAINT DEVICE FOR SMALL CHILDREN
儿童约束装置
1978-10-01
现行
GB/T 41596-2022
道路车辆装载物固定装置 拉紧装置通用要求
Load restraint assemblies on road vehicles—General requirements for tensioning devices
2022-10-12
现行
AS/NZS 4475.4-1997[ Pending Revision ]
Restraint systems for motor vehicles - Performance tests, Method 4: Determination of adjustment device forces
机动车辆约束系统.性能试验 方法4:调整装置力的测定
1997-06-05
现行
SAE J2238_201211
Airbag Inflator Ballistic Tank Test Procedure Gas Generating Devices Used In Inflatable Restraint Systems
充气约束系统中使用的气囊充气器弹道罐试验程序气体发生装置
2012-11-01
现行
AS/NZS 4475.6-1997[ Pending Revision ]
Restraint systems for motor vehicles - Performance tests, Method 6: Determination of free-end device strength
机动车约束系统.性能试验 方法6:自由端装置强度的测定
1997-06-05
现行
MIL MIL-D-81514B
DEVICE, RESTRAINT HARNESS TAKE-UP, INERTIA-LOCKING, POWERED-RETRACTING, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-D-81514A)
惯性锁紧电动回缩约束线束拉紧装置通用规范(代替MIL-D-81514A)
1969-09-10
现行
AS/NZS 3629.5-2013
Methods of testing child restraints, Method 5: Determination of quick-release device and low attachment connector actuation force
儿童约束装置的试验方法 方法5:快速释放装置和低连接连接器驱动力的测定
2013-05-08
现行
AS/NZS 4475.5-1997[ Pending Revision ]
Restraint systems for motor vehicles - Performance tests, Method 5: Determination of locking angle of a tilt-lock adjustment device
机动车辆约束系统.性能试验 方法5:倾斜锁调整装置锁止角的测定
1997-06-05
现行
MIL MIL-D-81514B Notice 1-Inactivation
DEVICE, RESTRAINT HARNESS TAKE-UP, INERTIA-LOCKING, POWERED-RETRACTING, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-D-81514A)
惯性锁紧电动伸缩式约束带拉紧装置通用规范(代替MIL-D-81514A)
1996-09-18
现行
ISO 10993-7-2008/Amd 1-2019
Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals — Amendment 1: Applicability of allowable limits for neonates and infants
新生儿和婴儿允许限值的适用性
2019-12-09
现行
MIL MIL-D-81514/1A
DEVICE, RESTRAINT HARNESS TAKE-UP, INERTIA-LOCKING POWERED-RETRACTING: FOR USE IN SIII-3 EJECTION SEAT (SUPERSEDING MIL-D-81514/1)
约束线束拉紧装置 惯性锁定电动回缩:用于SIII-3弹射座椅(代替MIL-D-81514/1)
1973-05-07
现行
MIL MIL-D-81514/1A Notice 1-Validation
DEVICE, RESTRAINT HARNESS TAKE-UP, INERTIA-LOCKING POWERED-RETRACTING: FOR USE IN SIII-3 EJECTION SEAT (SUPERSEDING MIL-D-81514/1)
惯性锁定电动伸缩式约束带拉紧装置:用于SIII-3弹射座椅(取代MIL-D-81514/1)
1991-10-29