现行

UNE-EN 14532-2-2005

Welding consumables. Test methods and quality requirements. Part 2: Supplementary methods and conformity assesment of consumables for steel, nickel and nickel alloys
焊接耗材 试验方法和质量要求 第2部分:钢、镍和镍合金耗材的补充方法和合格评定

2005-12-07

现行

DIN EN 14532-1

Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
焊接耗材.试验方法和质量要求.第1部分:钢、镍和镍合金用耗材的主要方法和合格评定；德文版EN 14532-1:2004

2005-02-01

现行

UNE-EN 14532-1-2006

Welding consumables. Test methods and quality requirements. Part 1: Primary methods and conformity assesment of consumables for steel, nickel and nickel alloys
焊接耗材 试验方法和质量要求 第1部分:钢、镍和镍合金耗材的主要方法和合格评定

2006-02-15

现行

BS EN 14532-1-2004

Welding consumables. Test methods and quality requirements-Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
焊接耗材 试验方法和质量要求 钢、镍和镍合金耗材的主要方法和合格评定

2004-12-07

现行

BS EN 14532-2-2004

Welding consumables. Test methods and quality requirements-Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys
焊接耗材 试验方法和质量要求 钢、镍和镍合金耗材的补充方法和合格评定

2004-12-07

现行

DIN EN 14532-3

Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
焊接耗材.试验方法和质量要求.第3部分:铝合金焊接用焊丝、焊丝和焊条的合格评定；德文版EN 14532-3:2004

2005-02-01

现行

UNE-EN 14532-3-2006

Welding consumables. Test methods and quality requirements. Part 3: Conformity assesment of wire electrodes, wires and rods for welding of aluminium alloys
焊接耗材 试验方法和质量要求 第3部分:铝合金焊接用焊丝、焊丝和焊条的合格评定

2006-03-29

现行

BS EN 14532-3-2004

Welding consumables. Test methods and quality requirements-Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
焊接耗材 试验方法和质量要求 铝合金焊接用焊丝、焊丝和焊条的合格评定

2005-01-13

现行

GOST R ISO 15792-2-2010

Материалы сварочные. Методы испытаний. Часть 2. Подготовка образцов для испытания из стали при однопроходной и двухпроходной сварке
焊接耗材测试方法 第2部分钢中单次和双程技术试样的准备

现行

ISO 15792-2-2020

Welding consumables — Test methods — Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel
焊接耗材试验方法第2部分:钢中单道和双道工艺试样和试样的制备

2020-08-20

现行

GB/T 25774.2-2023

焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备
Test methods for welding consumables—Part 2: Preparation of butt weld single-run and two-run technique test pieces and specimens for mechanical properties in steel

2023-11-27

现行

UNE-EN ISO 15792-2-2009

Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel (ISO 15792-2:2000)
焊接耗材试验方法第2部分:钢制单道和双道工艺试样的制备

2009-07-29

现行

CY/T 226.2-2020

化妆品类包装印刷品质量控制要求及检验方法 第2部分:软管包装
Quality control requirements and testing methods of cosmetics package- Part 2:plastic tube

2020-11-16

现行

GOST R 55139-2012

Совместимость технических средств электромагнитная. Оборудование для контактной сварки. Часть 2. Требования и методы испытаний
技术设备的电磁兼容性 电阻焊设备 要求和测试方法

现行

DIN EN 13528-2

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods
环境空气质量.测定气体和蒸汽浓度用扩散采样器；要求和试验方法.第2部分:特殊要求和试验方法；德文版EN 13528-2:2002

2002-12-01

现行

UNE-EN 13528-2-2003

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods.
环境空气质量.测定气体和蒸汽浓度用扩散取样器.要求和试验方法.第2部分:特殊要求和试验方法

2003-04-04

现行

GOST R EN 13528-2-2010

Качество атмосферного воздуха. Диффузионные пробоотборники, используемые при определении содержания газов и паров. Требования и методы испытаний. Часть 2. Специальные требования и методы испытаний
环境空气质量 用于测定气体和蒸汽浓度的扩散取样器 要求和测试方法 具体要求和试验方法

现行

DIN EN 16051-2

Inflation devices and accessories for inflatable consumer products - Part 2: Safety requirements, durability, performance, compatibility and test methods of inflators
充气消费品用充气装置和附件.第2部分:充气机的安全要求、耐久性、性能、兼容性和试验方法；德文版EN 16051-2:2012

2012-03-01

现行

BS 10/30212986 DC

BS EN 16051-2. Inflation devices and accessories for inflatable consumer products. Part 2. Safety requirements, durability, performance, compatibility and test methods of inflators
英国标准EN 16051-2 充气消费品的充气装置和附件 第二部分 充气机的安全要求、耐久性、性能、兼容性和试验方法

2010-02-11

现行

KS K ISO 20349-2

개인용 보호장구 — 주조 및 용접 시의 위험에 대비한 보호화 — 제2부: 용접과 관련공정의 위험에 대비한 보호 관련 요구사항 및 시험방법
个人防护装备 - 防止铸造厂和焊接中的风险的鞋类 - 第2部分:焊接和相关工艺中的风险防护要求和试验方法

2019-12-11