首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 AS 1012.11-2000
到馆阅读
收藏跟踪
购买正版
Methods of testing concrete, Method 11: Determination of the modulus of rupture 混凝土试验方法 方法11:断裂模量的测定
发布日期: 2000-05-18
本标准规定了一种测定按照AS 1012.8.2制备的混凝土试样断裂模量的方法,该试样作为三点荷载下的简支梁进行测试。注:1本标准可能涉及危险材料、操作和设备。本标准并非旨在解决与其使用相关的所有安全问题。本标准的使用者有责任在使用前建立适当的安全和健康实践,并确定监管限制的适用性。2本标准与纤维增强混凝土的相关性有待进一步研究。BD/42委员会正在向所有相关方寻求信息。
This Standard sets out a method for determining the modulus of rupture of concrete test specimens prepared in accordance with AS 1012.8.2 tested as simple beams with third-point loading.
分类信息
发布单位或类别: 澳大利亚-澳大利亚标准
关联关系
研制信息
相似标准/计划/法规
现行
UNE 36745-2004
Test method for the determination of the modulus of elasticity of steel for reinforced concrete.
钢筋混凝土用钢的弹性模量测定的试验方法
2004-12-17
现行
AS 1012.17-1997
Methods of testing concrete, Method 17: Determination of the static chord modulus of elasticity and Poisson's ratio of concrete specimens
混凝土试验方法 方法17:测定混凝土试样的静态弦弹性模量和泊松比
1997-08-05
现行
UNE-EN 13412-2008
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
混凝土结构保护和修理用产品和系统.试验方法.压缩弹性模量的测定
2008-10-08
现行
BS EN 13412-2006
Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression
混凝土结构保护和维修用产品和系统 测试方法 压缩弹性模量的测定
2006-11-30
现行
DIN EN 13412
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
混凝土结构保护和修理用产品和系统.试验方法.压缩弹性模量的测定;德文版EN 13412:2006
2006-11-01
现行
DIN EN 480-11
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete
混凝土、砂浆和灌浆用外加剂.试验方法.第11部分:硬化混凝土中空隙特性的测定;德文版EN 480-11:2005
2005-12-01
现行
UNE-EN 480-11-2006
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete
混凝土、砂浆和灌浆用外加剂.试验方法.第11部分:硬化混凝土中空隙特性的测定
2006-06-14
现行
BS 10/30215380 DC
BS EN 772-11. Methods of test for masonry units. Part 11. Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
英国标准EN 772-11 砌体构件的试验方法 第11部分 集料混凝土、蒸压加气混凝土、人造石和天然石砌块由于毛细作用的吸水率和粘土砌块的初始吸水率的测定
2010-06-29
现行
UNE-EN 772-11-2001
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units.
圬工单位的试验方法.第11部分:集料混凝土、人造石和天然石圬工单位由于毛细作用的吸水率和粘土圬工单位的初始吸水率的测定
2001-03-27