首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS ISO 6892-4:2015
到馆阅读
收藏跟踪
购买正版
Metallic materials. Tensile testing-Method of test in liquid helium 金属材料 拉伸试验
发布日期: 2015-10-31
BS ISO 6892-4:2015规定了液态氦中金属材料的拉伸试验方法 (沸点为-269°C或4,2 K,指定为4 K)并定义了 可以确定。ISO 6892的本部分也适用于低温(低于-196°C或 77 K),这需要特殊的仪器、较小的试件,并考虑锯齿屈服、绝热 加热和应变速率效应。根据ISO 6892的本部分,在4K下进行拉伸试验时,安装在低温恒温器中的试样 完全浸入液氦(He)中,并在标称应变速率下使用位移控制进行测试 10-3 s-1或更少。 注:稀有3He同位素的沸点为3,2 K。通常,测试在4He或混合物中进行 3He和4He的高浓度。因此,如前所述,温度为4K。交叉引用:ISO 6892-1ISO 6892-3ISO 7500-1ISO 9513ASTM E 1450JIS Z 2277购买本文件时可获得的所有当前修订版均包含在购买本文件中。
BS ISO 6892-4:2015 specifies the method of tensile testing of metallic materials in liquid helium (the boiling point is -269 °C or 4,2 K, designated as 4 K) and defines the mechanical properties that can be determined.This part of ISO 6892 may apply also to tensile testing at cryogenic temperatures (less than -196 °C or 77 K), which requires special apparatus, smaller test pieces, and concern for serrated yielding, adiabatic heating, and strain-rate effects.To conduct a tensile test according to this part of ISO 6892 at 4 K, the test piece installed in a cryostat is fully submerged in liquid helium (He) and tested using displacement control at a nominal strain rate of 10-3 s-1 or less.NOTE The boiling point of the rare 3He isotope is 3,2 K. Usually, the tests are performed in 4He or a mixture of 3He and 4He with a high concentration of 4He. Therefore, the temperature is, as designated before, 4 K.Cross References:ISO 6892-1ISO 6892-3ISO 7500-1ISO 9513ASTM E 1450JIS Z 2277All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
JIS Z 2277-2000
Method of tensile testing for metallic materials in liquid helium
液氦中金属材料拉伸试验方法
2000-01-01
现行
GB/T 228.4-2019
金属材料 拉伸试验 第4部分:液氦试验方法
Metallic materials—Tensile testing—Part 4: Method of test in liquid helium
2019-08-30
现行
ISO 6892-4-2015
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
金属材料 - 拉伸试验 - 第4部分:液氦试验方法
2015-09-29
现行
JIS Z 2283-1998
Method of low cycle fatigue testing for metallic materials in liquid helium
液氦中金属材料的低周疲劳试验方法
1998-01-01
现行
JIS Z 2284-1998
Method of elastic-plastic fracture toughness Jic testing for metallic materials in liquid helium
液氦中金属材料的弹塑性断裂韧性Jic试验方法
1998-01-01
现行
KS B 0802(2018 Confirm)
금속 재료 인장 시험 방법
金属材料拉伸试验方法
2003-10-08
现行
KS B 0802(2018 Confirm)
금속 재료 인장 시험 방법
金属材料拉伸试验方法
2003-10-08
现行
KS B 0802(2023 Confirm)
금속 재료 인장 시험 방법
金属材料拉伸试验方法
2003-10-08
现行
KS B 0814(2016 Confirm)
금속 재료의 인장 크리프 시험 방법
金属材料拉伸潜变试验法
2001-05-11
现行
KS B 0814(2021 Confirm)
금속 재료의 인장 크리프 시험 방법
金属材料拉伸蠕变试验方法
2001-05-11
现行
BS EN ISO 6892-3-2015
Metallic materials. Tensile testing-Method of test at low temperature
金属材料 拉伸试验
2015-04-30
现行
BS EN ISO 6892-2-2018
Metallic materials. Tensile testing-Method of test at elevated temperature
金属材料 拉伸试验
2018-08-22
现行
BS EN ISO 6892-1-2019
Metallic materials. Tensile testing-Method of test at room temperature
金属材料 拉伸试验
2020-01-03
现行
AS 1391-2020
Metallic materials - Tensile testing - Method of test at room temperature
金属材料.拉伸试验.室温试验方法
2020-06-26
现行
KS D 0301(2016 Confirm)
금속재료의 인장 릴엑세이션(응력 완화) 시험 방법
金属材料拉伸松弛试验法
1991-10-07
现行
KS D 0301(2021 Confirm)
금속재료의 인장 릴엑세이션(응력 완화) 시험 방법
金属材料拉伸应力松弛试验方法
1991-10-07
现行
JIS Z 2276-2012
Method of tensile stress relaxation test for metallic materials
金属材料拉伸应力松弛试验方法
2012-01-01
现行
GB/T 10120-2013
金属材料 拉伸应力松弛试验方法
Metallic materials - Tensile stress relaxation - Method of test
2013-09-06
现行
BS EN 2002-2-2005
Aerospace series. Metallic materials. Test methods-Tensile testing at elevated temperature
航空航天系列 金属材料 测试方法 高温拉伸试验
2010-11-30
现行
BS EN 2002-1-2005
Aerospace series. Metallic materials. Test methods-Tensile testing at ambient temperature
航空航天系列 金属材料 测试方法
2006-01-03