BS 05/30066638 DC-EN 15424 医疗器械的消毒灭菌过程的开发、验证和常规控制低温蒸汽和甲醛-国家数字标准馆

现行 BS 05/30066638 DC

到馆提醒

收藏跟踪

购买正版

EN 15424. Sterilization of medical devices. Development, validation and routine control of sterilization processes. Low temperature steam and formaldehyde EN 15424 医疗器械的消毒灭菌过程的开发、验证和常规控制低温蒸汽和甲醛

发布日期： 2005-10-26

交叉引用:EN 14180*EN ISO 13485*ISO 10012*EN ISO 10993-1*EN ISO 10993-17*EN ISO 11138-1*EN ISO 11138-5*EN ISO 11140-1*EN ISO 11737-1*EN ISO 11737-2*EN ISO 14937*EN ISO 17664*

Cross References:EN 14180*EN ISO 13485*ISO 10012*EN ISO 10993-1*EN ISO 10993-17*EN ISO 11138-1*EN ISO 11138-5*EN ISO 11140-1*EN ISO 11737-1*EN ISO 11737-2*EN ISO 14937*EN ISO 17664*

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

GOST R ISO 20857-2016

Стерилизация медицинской продукции. Горячий воздух. Требования к разработке, валидации и текущему контролю процесса стерилизации медицинских изделий
医疗器械灭菌干热对医疗器械灭菌过程的开发验证和常规控制的要求

Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices
医疗器械灭菌-低温蒸汽和甲醛-医疗器械灭菌过程的开发、验证和常规控制要求；德文版EN 15424:2007

UNE-EN 15424-2007

Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices
医疗器械的灭菌.低温蒸汽和甲醛.医疗器械灭菌过程的开发、验证和常规控制要求

GOST R ISO 25424-2013

Стерилизация медицинских изделий. Стерилизация низкотемпературная пароформальдегидная. Требования к разработке, валидации и рутинному контролю процесса стерилизации
医疗器械灭菌低温蒸汽和甲醛对医疗器械灭菌过程的开发验证和常规控制的要求

医疗器械干热灭菌过程的开发、确认和常规控制要求
Requirements for the development,validation and routine control of dry heat sterilization process for medical devices

BS EN ISO 11137-1-2015+A2-2019

Sterilization of health care products. Radiation-Requirements for development, validation and routine control of a sterilization process for medical devices
医疗保健产品的消毒辐射

BS 04/30048118 DC

BS EN ISO 11135. Sterilization of health care products. Ethylene oxide. Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN ISO 11135 医疗保健产品的消毒环氧乙烷医疗器械灭菌过程的开发、验证和常规控制要求

BS EN ISO 20857-2013

Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices
医疗保健产品的消毒干热医疗器械灭菌过程的开发、验证和常规控制要求

BS EN ISO 11135-2014+A1-2019

Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices
医疗产品的消毒环氧乙烷医疗器械灭菌过程的开发、验证和常规控制要求

BS EN ISO 17665-1-2006

Sterilization of health care products. Moist heat-Requirements for the development, validation and routine control of a sterilization process for medical devices
医疗保健产品的消毒湿热

의료제품의 멸균 — 산화에틸렌 — 의료기기용 멸균 공정의 개발, 유효성 확인, 정기 관리에 대한 요구사항
保健产品的灭菌 - 环氧乙烷 - 用于医疗器械灭菌过程的开发验证和日常控制的要求

Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices
保健产品的灭菌 - 环氧乙烷 - 用于医疗器械灭菌过程的开发验证和日常控制的要求

Sterilization of health care products — Moist heat — Requirements for the development, validation and routine control of a sterilization process for medical devices
卫生保健产品灭菌湿热医疗器械灭菌过程的开发、验证和常规控制要求

의료제품의 멸균 ─ 산화에틸렌 ─ 의료기기용 멸균 공정의 개발, 유효성 확인, 정기 관리에 대한 요구사항
保健品灭菌─ 环氧乙烷─ 医疗器械灭菌过程的开发、验证和常规控制要求

AAMI/ISO 20857-2010/(R)2015

Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices
医疗保健产品的灭菌.干热.医疗器械灭菌过程的开发、验证和常规控制要求

GOST ISO 11135-2017

Стерилизация медицинской продукции. Этиленоксид. Требования к разработке, валидации и текущему управлению процессом стерилизации медицинских изделий
保健产品的灭菌环氧乙烷医疗器械灭菌过程的开发验证和常规控制的要求

AAMI/ISO 11135-2014

Sterilization of health care products - Ethylene oxide - Requirements for development, validation and routine control of a sterilization process for medical devices
医疗保健产品的灭菌.环氧乙烷.医疗器械灭菌过程的开发、验证和常规控制要求

Sterilization of health care products — Dry heat — Requirements for the development, validation and routine control of a sterilization process for medical devices
保健品灭菌——干热；医疗器械灭菌过程的开发、验证和常规控制要求

BS EN ISO 14937-2009

Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
医疗保健产品的消毒医疗器械用杀菌剂的特性、杀菌过程的开发、验证和常规控制的一般要求

의료용품의 멸균 — 의료기기용 멸균제 특성 분석 및 멸균 공정의 개발, 유효성 확인, 정기 관리에 대한 일반 요구사항
保健产品的灭菌 - 杀菌剂的一般要求以及医疗器械灭菌过程的开发验证和日常控制

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统