最大包装尺寸装载方法基于数学方法，允许计算最大包装尺寸表。该方法原则上不区分散装装载和货物系统装载。然而，必须考虑一些限制条件:-一些货物系统生成预先确定的托盘轨迹。必须首先确定取决于托盘尺寸和可能轨迹的包络曲线。-门几何限制（带或不带货物装载系统）-由于重量、装载几何和运输能力而产生的转向限制-安全要求本文件不适用于航空公司运营使用。工程师应使用它进行计算或开发计算机程序，以生成AS1825中规定的最大包装尺寸表。

The methodology for maximum package size loading is bsed on a mathematical method allowing the calculation of maximum package size tables. This method does not in principal differentiate between bulk loading and cargo system loading. However, some restrictions have to be considered: - Some cargo systems generate pre-determined pallet trajectories. Envelope curves depending on the pallet size and the possible trajectories have to be determined first. - Door geometric limitations (with or without cargo loading system) - Turning limitations due to weight, load geometry and conveyance capability - Securing requirements This document is not intended for airline operational use. It should be used by engineers performing calculations or developing computer programs to produce Maximum Package Size tables specified in AS1825.