首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D2500-23
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels 石油产品和液体燃料浊点的标准试验方法
发布日期: 2023-03-01
1.1 本试验方法仅适用于在40层透明的石油产品和生物柴油 厚度mm,浊点低于49 °C。 注1: 实验室间计划由试验方法的石油产品组成 1500美元 颜色为3.5或更低。本试验方法中规定的精度可能不适用于ASTM颜色高于3.5的样品。 1.2 以国际单位制表示的值应视为标准值。本标准不包括其他测量单位。 1.3 警告 -汞已被许多监管机构指定为可导致严重医疗问题的危险物质。汞或其蒸汽已被证明对健康有害,对材料具有腐蚀性。处理汞和含汞产品时应谨慎。有关更多信息,请参阅适用的产品安全数据表(SDS)。当地或国家法律可能禁止销售汞或含汞产品,或两者兼而有之。 用户必须确定其所在地销售的合法性。 1.4 本标准并不旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践,并确定监管限制的适用性。 有关具体危险说明,请参阅第节 7. . 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《国际标准、指南和建议制定原则决定》中确立的国际公认标准化原则制定的。 =====意义和用途====== 5.1 对于石油产品和生物柴油燃料,石油产品的浊点是其在某些应用中的最低使用温度的指标。
1.1 This test method covers only petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness, and with a cloud point below 49 °C. Note 1: The interlaboratory program consisted of petroleum products of Test Method D1500 color of 3.5 and lower. The precisions stated in this test method may not apply to samples with ASTM color higher than 3.5. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 WARNING —Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7 . 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 For petroleum products and biodiesel fuels, cloud point of a petroleum product is an index of the lowest temperature of their utility for certain applications.
分类信息
关联关系
研制信息
归口单位: D02.07
相似标准/计划/法规
现行
ASTM D7689-21
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
石油产品和液体燃料浊​​点标准测试方法(迷你法)
2021-01-01
现行
GB/T 6986-2014
石油产品浊点测定法
Standard test method for cloud point of petroleum products
2014-02-19
现行
ASTM D7397-21
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
石油产品和液体燃料浊​​点标准测试方法(小型化光学方法)
2021-01-01
现行
ASTM D7683-21
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
石油产品和液体燃料浊​​点标准试验方法(小型试验方法)
2021-01-01
现行
ASTM D5772-21
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
石油产品和液体燃料浊​​点标准测试方法(线性冷却速率法)
2021-01-01
现行
ASTM D5773-21
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
石油产品和液体燃料浊​​点标准试验方法(恒定速率法)
2021-01-01
现行
ASTM D5771-21
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
石油产品和液体燃料浊点的标准试验方法(光学检测分级冷却法)
2021-01-01
现行
JIS K 2269-1987
Testing methods for pour point and cloud point of crude oil and petroleum products
原油和石油产品倾点和浊点的试验方法
1987-01-01
现行
ASTM D7346-15(2021)
Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
石油产品和液体燃料无流点和倾点的标准试验方法
2021-04-01
现行
ASTM D97-17b(2022)
Standard Test Method for Pour Point of Petroleum Products
石油产品倾点的标准试验方法
2022-11-01
现行
ASTM D5985-02(2020)
Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
石油产品倾点标准试验方法
2020-05-01
现行
ASTM D5950-14(2020)
Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
石油产品倾点的标准试验方法(自动倾斜法)
2020-05-01
现行
ASTM D6892-03(2020)
Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
石油产品倾点标准试验方法
2020-05-01
现行
NB/SH/T 0886-2014
石油产品倾点的测定 自动倾斜法
Standard test method for pour point of petroleum products (Automatic tilt method)
2014-06-29
现行
ASTM D611-23
Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
石油产品和烃类溶剂的苯胺点和混合苯胺点的标准试验方法
2023-05-01
现行
ASTM D6749-24
Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
石油产品倾点的标准试验方法(自动气压法)
2024-03-01
现行
ASTM D5949-16(2022)
Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
石油产品倾点的标准试验方法(自动压力脉冲法)
2022-07-01
现行
SN/T 3017-2011
石油产品倾点试验方法 自动气压法
Standard test method for pour point of petroleum products-Automatic air pressure method
2011-09-09
现行
ASTM D5762-24
Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
船用入口化学发光法测定液态烃、石油和石油产品中氮的标准试验方法
2024-07-01
现行
GOST R 59683-2021
Нефтепродукты. Методы определения температуры вспышки в анализаторе с постоянно закрытым тиглем
石油产品 用连续闭杯测试仪测定闪点的标准试验方法