首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 KS B 4104-2014(2020)
到馆提醒
收藏跟踪
购买正版
슬라이서의 시험 및 검사 방법 单板切片机 - 试验和检验方法
发布日期: 2014-12-26
该标准规定了刀片附着面长度1200mm以上6000mm以下、行程750mm以上2200mm以下的刮板功能及驾驶性能的试验方法和几何精度及加工精度的检验方法。平底平底机是指通过往复运动刀片或翻边,切削制造给定厚度剖面的机器。
이 표준은 날 부착면의 길이 1200mm 이상 6000mm 이하, 스트로크 750mm 이상 2200mm 이하인 슬라이서의 기능 및 운전 성능에 관한 시험방법과 기하학적 정밀도 및 가공 정밀도의 검사 방법에 대하여 규정한다.비고 슬라이서란 날 또는 플리치를 왕복 운동시켜서 절삭하여 정해진 두께의 단면을 제조하는 기계를 말한다.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
JIS B 6599-1991
Veneer slicers -- Test and inspection methods
单板切片机试验和检验方法
1991-01-01
现行
JIS B 6542-1991
Veneer lathes -- Test and inspection methods
单板车床试验和检验方法
1991-01-01
现行
JIS B 6543-1991
Veneer knife grinders -- Test and inspection methods
单板刀磨床试验和检验方法
1991-01-01
现行
AS/NZS 2098.7-2006
Methods of test for veneer and plywood, Method 7: Density of veneer and plywood
单板和胶合板的试验方法 方法7:单板和胶合板的密度
2006-10-30
现行
AS/NZS 2098.1-2006
Methods of test for veneer and plywood, Method 1: Moisture content of veneer and plywood
单板和胶合板的试验方法 方法1:单板和胶合板的含水量
2006-10-30
现行
AS/NZS 2098.6-2006
Methods of test for veneer and plywood, Method 6: Depth of peeler checks in veneer and plywood
单板和胶合板的试验方法 方法6:单板和胶合板的剥离深度检查
2006-10-30
现行
GOST 20800-1975
Шпон лущеный. Методы испытаний
旋切单板 测试方法
现行
AS/NZS 2098.4-2006
Methods of test for veneer and plywood, Method 4: Measurement of dimensions and shape for sheets of veneer and plywood
单板和胶合板的试验方法 方法4:单板和胶合板板材的尺寸和形状测量
2006-10-30
现行
LY/T 3136-2019
旋切单板干燥质量检测方法
Test method of rotary veneers drying quality
2019-10-23
现行
LY/T 3160-2019
单板干燥机节能监测方法
Monitoring and testing method of energy conserveation for veneer dryer
2019-10-23
现行
AS/NZS 2098.2-2012
Methods of test for veneer and plywood, Method 2: Bond quality of plywood (chisel test)
单板和胶合板的试验方法 方法2:胶合板的粘合质量(凿子试验)
2012-10-24
现行
AS/NZS 2098.0-2006
Methods of test for veneer and plywood, Part 0: General introduction and list of methods
单板和胶合板的试验方法 第0部分:概述和方法列表
2006-10-30
现行
AS/NZS 2098.11-2005
Methods of test for veneer and plywood, Method 11: Determination of formaldehyde emissions for plywood
单板和胶合板的试验方法 方法11:胶合板甲醛释放量的测定
2005-08-08
现行
ISO 10033-1-2011
Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods
单板层积材(LVL)——粘接质量第1部分:试验方法
2011-04-12
现行
AS/NZS 2098.3-2006
Methods of test for veneer and plywood, Method 3: Bond quality and strength of scarf joints in plywood
单板和胶合板的试验方法 方法3:胶合板嵌接接头的粘合质量和强度
2006-10-30
现行
AS/NZS 2098.8-2006
Methods of test for veneer and plywood, Method 8: Water absorption and thickness swelling of unpainted plywood
单板和胶合板的试验方法 方法8:未上漆胶合板的吸水率和厚度膨胀
2006-10-30
现行
AS/NZS 2098.5-2006
Methods of test for veneer and plywood, Method 5: Resistance of gluelines in plywood to attack by micro-organisms
单板和胶合板的试验方法 方法5:胶合板中胶合线的抗微生物侵蚀性
2006-10-30
现行
AS/NZS 4357.1-2005
Structural laminated veneer lumber, Part 1: Method of test for measurement of dimensions and shape
结构胶合板第1部分:尺寸和形状测量的试验方法
2005-08-08
现行
AS/NZS 4357.2-2006
Structural laminated veneer lumber (LVL), Part 2: Determination of structural properties - Test methods
结构单板层积材(LVL)第2部分:结构性能的测定试验方法
2006-04-11
现行
ISO 10033-1-2011/Amd 1-2024
Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods — Amendment 1
层压单板木材 粘合质量 第1部分:试验方法 修改件1
2024-10-11