BS EN 60793-2-30:2015适用于子类别A3a、A3b、A3c、A3d、A3e、A3f和 A3g。这些纤维用于或可用于不同的信息传输 设备、采用类似光传输技术的其他应用以及光纤 光缆。三种类型的要求适用于这些纤维:IEC 60793-2中定义的一般要求；本标准中涵盖的A3类多模光纤通用的具体要求 第3条中给出的标准和规范；适用于各分包商的特殊要求- 类别或特定应用 （例如，汽车或工业应用），其定义见规范子类别 附件。参考交叉参考:IEC 60793-3-1-1-1-1-0 0 0 0 0 793-1 1-3 0 0 IEC 60793-3 3-1 1 1-3 3 3-1 IEC 60793-1 1 1-3 3 3-1 1 1 1-1 1 1-1 1 1-1 1-1 1-1 1-1-3 0 0 0 0 IEC 60793-3-3-3 0 0 0 0 0 0 0 3-3 3 3-3-3 3-1 1-3-1-1 IEC 60793-1-1 1-1-1-1 1-1-1 1-1 1-1-1-1-1-1-1-1-1-1 0 0 0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 3-3-3-1-1-3-1-1-1-1-1-1-3-1-1-1-1-1-1-1-1-1-1 1-1-1 1-50EN 60793-1-51EN 60793-1-52EN 60793-2所有电流购买本文件时提供的修订内容包括在内。

BS EN 60793-2-30:2015 is applicable to sub-categories A3a, A3b, A3c, A3d, A3e, A3f and A3g. These fibres are used or can be incorporated in different information transmission equipment, other applications employing similar light transmitting techniques as well as fibre optic cables.Three types of requirements apply to these fibres:general requirements, as defined in IEC 60793-2;specific requirements common to the category A3 multimode fibres covered in this standard and which are given in Clause 3;particular requirements applicable to the individual sub-categories or specific applications (e.g. automotive or industrial applications), which are defined in the normative subcategory annexes.Cross References:IEC 60793-1-20IEC 60793-1-21IEC 60793-1-22IEC 60793-1-30IEC 60793-1-31IEC 60793-1-40IEC 60793-1-41IEC 60793-1-43IEC 60793-1-46IEC 60793-1-50IEC 60793-1-51IEC 60793-1-52IEC 60793-2IEC TR 62048:2014EN 60793-1-20EN 60793-1-21EN 60793-1-22EN 60793-1-30EN 60793-1-31EN 60793-1-40EN 60793-1-41EN 60793-1-43EN 60793-1-46EN 60793-1-50EN 60793-1-51EN 60793-1-52EN 60793-2All current amendments available at time of purchase are included with the purchase of this document.