BS EN IEC 61076-2-114:2020-电气和电子设备用连接器产品要求-国家数字标准馆

现行 BS EN IEC 61076-2-114:2020

到馆提醒

收藏跟踪

购买正版

Connectors for electrical and electronic equipment. Product requirements-Circular connectors. Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz 电气和电子设备用连接器产品要求

发布日期： 2020-11-04

IEC 61076的这一部分描述了通常用于
工业应用中的数据和电力传输。这些连接器包括固定式连接器和固定式连接器
可重新布线或不可重新布线的自由连接器。数据传输性能
适用于高达100 MHz的5类。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This part of IEC 61076 describes circular connectors with M8 screw locking typically used for
data and power transmissions in industrial applications. These connectors consist of fixed and
free connectors that are either rewireable or non-rewireable. Data transmission performance
is for Category 5 up to 100 MHz.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN 61076-2-2011

Connectors for electronic equipment. Product requirements-Sectional specification for circular connectors
电子设备用连接器产品要求

BS EN 61076-1-2006+A1-2019

Connectors for electronic equipment. Product requirements-Generic specification
电子设备用连接器产品要求

BS EN 61076-3-001-2008

Connectors for electronic equipment. Product requirements-Rectangular connectors. Blank detail specification
电子设备用连接器产品要求

BS EN 61076-2-001-2011

Connectors for electronic equipment. Product requirements-Circular connectors. Blank detail specification
电子设备用连接器产品要求

BS EN 60512-10-4-2003

Connectors for electronic equipment. Tests and measurements-Test 10d. Electrical overload (connectors)
电子设备用连接器测试和测量

IEC 61076-2-111-2017

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
电气和电子设备用连接器.产品要求.第2-111部分:圆形连接器.带M12螺钉锁紧的电源连接器详细规范

BS EN IEC 60512-1-2018

Connectors for electrical and electronic equipment. Tests and measurements-Generic specification
电气和电子设备用连接器测试和测量

IEC 61076-3-2008

Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
电子设备连接器 - 产品要求 - 第3部分:矩形连接器 - 分段规格

IEC 61076-2-2011

Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
电子设备用连接器产品要求第2部分:圆形连接器的分规范

BS EN 61076-2-101-2012

Connectors for electronic equipment. Product requirements-Circular connectors. Detail specification for M12 connectors with screw-locking
电子设备用连接器产品要求

BS EN 61076-2-105-2008

Connectors for electronic equipment. Product requirements-Circular connectors. Detail specification for M5 connectors with screw-locking
电子设备用连接器产品要求

BS PD IEC/PAS 61076-3-126-2018

Connectors for electrical and electronic equipment. Product requirements-Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
电气和电子设备用连接器产品要求矩形连接器.带推拉锁定的工业环境用5极电源连接器详细规范

BS EN 61076-2-107-2010

Connectors for electronic equipment. Product requirements-Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
电子设备用连接器产品要求

IEC 61076-1-2006

Connectors for electronic equipment - Product requirements - Part 1: Generic specification
电子设备连接器 - 产品要求 - 第1部分:通用规范

IEC 61076-1-2006+AMD1-2019 CSV

Connectors for electronic equipment - Product requirements - Part 1: Generic specification
电子设备用连接器.产品要求.第1部分:总规范

IEC 61076-3-001-2008

Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
电子设备用连接器产品要求第3-001部分:矩形连接器空白详细规范

IEC 61076-2-001-2011

Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
电子设备连接器 - 第2-001部分:圆形连接器 - 空白详细规格

IEC 60512-1-2018 RLV

Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
电气和电子设备用连接器.试验和测量.第1部分:总规范

IEC 60512-1-2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
电气和电子设备用连接器试验和测量第1部分:总规范

IEC 61076-3-126-2023

Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking
电气和电子设备用连接器.产品要求.第3-126部分:矩形连接器.具有推拉锁定的工业环境用5路电源连接器的详细规范

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统