1.1 这些测试方法涵盖了水基地板抛光剂中使用的乳液聚合物的测试程序。术语“乳液聚合物”主要用于表示通过常规乳液聚合技术生产的材料，但也可以扩展到聚合后随后乳化或分散的聚合物。除非另有说明，否则测试可用于任何聚合物或共聚物系统。这些方法按以下顺序出现: 部分 采样 4. 固体总量 5. pH值 6. 表观粘度 7. 沉淀物 8. 储存稳定性 9 冻结- 解冻稳定性 10 比重 11 1.2 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 本试验的目的不是完全识别和表征聚合物，而是识别预先确定聚合物在配方中的用途以及质量控制目的所需的各种基本参数。 3.2 在这种情况下，精确性和准确性的声明是不合适的。

1.1 These test methods cover test procedures for emulsion polymers that are used in water-based floor polishes. The term “emulsion polymers” is used primarily to denote those materials produced by regular emulsion polymerization techniques, but may be extended to those polymers that are subsequently emulsified or dispersed after polymerization. Unless otherwise noted, the tests may be used for any polymer or copolymer systems. The methods appear in the following order: Section Sampling 4 Total Solids 5 pH Value 6 Apparent Viscosity 7 Sediment 8 Storage Stability 9 Freeze-thaw Stability 10 Specific Gravity 11 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 The purpose of this test is not to fully identify and characterize a polymer, but to identify a variety of basic parameters needed to predetermine the usefulness of the polymer in formulations as well as for Quality Control purposes. 3.2 A statement of precision and accuracy is not appropriate in this case.