1.1本文件已经制定和发布，为供应商遵守EN 9100的规定提供了AQAP 2110的应用信息和指导。本文件作为AQAP 2009 Annex F和EN 9137出版。由北约组织和北约和工业界使用的行业代表，便于使用和了解AQAP 2110与EN 9100之间的关系。 1.2它旨在促进收购者及其EN 9100供应商对AQAP 2110要求的解释的共同性。 1.3其内容没有合法或合同的地位，也不取代，添加或取消任何AQAP 2110或EN 9100要求。 1.4由于可能存在的条件多样性（取决于工作类型或过程，所使用的设备以及所涉及人员的技能等因素），不应将此指导视为包括所有内容，也不应视为制定具体的方法或方法来满足合同要求。利益相关者应该意识到可以使用其他手段或方法来满足这些要求。 1.5本指南的用户应该记住，AQAP 2110的要求是合同中引用的供应商和次级供应商的强制性要求

1.1 This document has been prepared and issued to provide information and guidance on the application of AQAP 2110 when the Supplier adheres to the provisions of EN 9100. This document is published as AQAP 2009 Annex F and EN 9137. It was jointly developed by NATO and industry representatives for use by NATO and industry to facilitate the use and understanding of the relationship between the AQAP 2110 and EN 9100. 1.2 It aims to contribute to commonality of interpretation of the AQAP 2110 requirements by the Acquirer and their EN 9100 Supplier. 1.3 Its content has no legal or contractual status nor does it supersede, add to, or cancel any of the AQAP 2110 or EN 9100 requirements. 1.4 Because of the multiplicity of conditions that can exist (dependent on such factors as the type of work or process, the devices used, and the skill of personnel involved), this guidance should not be considered as all encompassing nor should it be considered as imposing specific means or methods for meeting contract requirements. Stakeholders should be aware that other means or methods could be used to meet these requirements. 1.5 Users of this guidance should keep in mind that the requirements of AQAP 2110 are mandatory, as cited in the contract, on Suppliers and Sub-suppliers.