首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 SH/T 0565-2008
到馆阅读
收藏跟踪
购买正版
加抑制剂矿物油的油泥和腐蚀趋势测定法 Standard test method for determination of the sludging and corrosion tendencies of inhibited mineral oils
发布日期: 2008-04-23
实施日期: 2008-10-01
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
ASTM D4310-22a
Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
测定抑制矿物油的沉降和腐蚀倾向的标准试验方法
2022-11-01
现行
DIN 38415-1
German standard methods for the examination of water, waste water and sludge - Bio-assays with microorganisms (group T) Determination of organophosphate and carbamate pesticides by the cholinesterase inhibition test (T 1)
水、废水和污泥检验的德国标准方法.亚动物试验(T组).第1部分:胆碱酯酶抑制有机磷和氨基甲酸酯农药的测定(胆碱酯酶抑制试验)(T 1)
1995-02-01
现行
ASTM D3310-00(2023)
Standard Test Method for Determining Corrosivity of Adhesive Materials
测定粘性材料腐蚀性的标准试验方法
2023-01-01
现行
DIN 38415-4
German standard methods for the examination of water, waste water and sludge - Bioassays with microorganisms (group T) - Part 4: Determination of the mutagenic potential of water using the Salmonella microsome test (Ames Test) (T 4)
德国水、废水和污泥检验标准方法亚动物试验(T组)第4部分:用沙门氏菌微粒体试验(Ames试验)测定基因毒性潜力(T 4)
1999-12-01
现行
DIN 38415-3
German standard methods for the examination of water, waste water and sludge - Bio-assays with microorganisms (group T) - Part 1: Determination of the mutagenic potential of water using the umu-test (T 3)
德国水、废水和污泥检验标准方法.亚动物试验(T组).第3部分:用umu试验(T 3)测定水和废水成分的基因型潜力
1996-12-01
现行
ASTM D7548-22
Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
石油产品中加速铁腐蚀测定的标准试验方法
2022-05-01
现行
ASTM D1743-22
Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
测定润滑脂防腐性能的标准试验方法
2022-05-01
现行
GB/T 5018-2008
润滑脂防腐蚀性试验法
Standard test method for determining corrosion preventive properties of lubricating greases
2008-02-13
现行
ASTM D5485-21
Standard Test Method for Determining Corrosive Effect of Combustion Products Using the Cone Corrosimeter
用锥形腐蚀计测定燃烧产物腐蚀作用的标准试验方法
2021-03-01
现行
ASTM B858-06(2024)
Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
测定铜合金应力腐蚀开裂敏感性的氨蒸气试验的标准试验方法
2024-07-01
现行
ASTM D7858-13(2018)
Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
通过压力流体萃取测定土壤 污泥和生物固体中双酚A的标准测试方法 并通过液相色谱/串联质谱法分析
2018-09-01
现行
ASTM G198-17(2023)
Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
与处理过的木材接触的传动紧固件相对腐蚀性能测定的标准试验方法
2023-11-01
现行
ASTM D2688-23
Standard Test Method for Determination of Corrosion Rate in a Water System in the Absence of Heat Transfer (Weight Loss Method)
在没有热传递的情况下测定水系统腐蚀速率的标准试验方法(重量损失法)
2023-12-01
现行
ASTM D4778-24
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
热传递条件下冷却水腐蚀和结垢趋势测定的标准试验方法
2024-07-01
现行
ASTM G47-22
Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
2XXX和7XXX铝合金产品应力腐蚀开裂敏感性测定的标准试验方法
2022-12-01
现行
ASTM D6138-23a
Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
在动态潮湿条件下测定润滑脂防腐性能的标准试验方法(Emcor试验)
2023-07-01
现行
NB/SH/T 6006-2020
石油产品铜腐蚀性快速试验 一次性铜箔片
Standard test method for rapid determination of corrosiveness to copper from petroleum products disposable copper foill strip method
2020-10-23
现行
ASTM D7667-21
Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
用汽车火花点火发动机燃料薄银条法测定银腐蚀性的标准试验方法
2021-11-01
现行
ASTM D7426-24
Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
测定聚合物或弹性体化合物Tg的DSC程序分配的标准试验方法
2024-08-01
现行
ASTM F2129-24
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
进行循环动电位极化测量以确定小型植入装置腐蚀敏感性的标准试验方法
2024-09-01