现行

MIL MIL-DTL-55302/17B

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.200 SPACING) (SUPERSEDING MIL-C-55302/17A)
印制电路组件和附件连接器:印制电路板用直通插座（.200间距）（取代MIL-C-55302/17A）

2004-03-24

现行

MIL MIL-DTL-55302/18B

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PIN, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.200 SPACING) (SUPERSEDING MIL-C-55302/18A)
印制电路组件和附件连接器:印制电路板用直通式插针（.200间距）（取代MIL-C-55302/18A）

2004-03-24

现行

MIL MIL-DTL-55302/111B

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)(SUPERSEDING MIL-C-55302/111A)
印制电路组件和附件连接器:多层印制电路板用直通插座触点（.100间距）（取代MIL-C-55302/111A）

2006-05-22

现行

MIL MIL-C-55302/112 Notice 1-Cancellation

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PINS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 INCH CONTACT SPACING) (112 CONTACTS, SPECIAL) (NO S/S DOCUMENT)
印制电路组件和附件连接器:多层印制电路板用直角插脚（.100英寸触点间距）（112个触点 特殊）（无S/S文件）

1979-09-07

现行

MIL MIL-C-55302/48 Notice 1-Cancellation

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 INCH CONTACT SPACING) (56 AND 112 CONTACTS) (NO S/S DOCUMENT)
印制电路组件和附件连接器:多层印制电路板用直通插座（.100英寸触点间距）（56和112触点）（无S/S文件）

1979-09-07

现行

MIL MIL-DTL-55302/126D

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES RECEPTACLE, 80 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING) (SUPERSEDING MIL-C-55302/126C)
印制电路板用80触点位置的印制电路组件和附件连接器插座（.050英寸间距）（取代MIL-C-55302/126C）

2005-02-18

现行

MIL MIL-DTL-55302/22F

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING MIL-C-55302/22E)
印制电路组件和附件连接器:多层印制电路板用直通插座、插座触点（.100间距）（取代MIL-C-55302/22E）

2004-03-24

现行

UNE-EN 60603-8-2001

Connectors for frequencies below 3 MHz for use with printed boards -- Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm.
印制电路板用频率低于3MHz的连接器第8部分:2.54mm（0.1in）基本栅极、0.63mm×0.63mm方形阳触点的印制电路板用两件式连接器

2001-09-21

现行

SJ 50681/57-1994

ＳＭＡ系列（不接电缆）插孔接触件印制电路板用２级射频同轴插座连接器详细规范
Connectors,receptacle,electrical,coaxial radio frequency (series SMA(uncabled),socket contact,printed circuit,class 2),detail specification for

1994-09-30

现行

MIL MIL-DTL-55302/76D

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, SOCKET STRAIGHT-THRU, POLARIZED FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) (SEE BASE FOR INACTIVATION NOTICE) (SUPERSEDING MIL-C-55302/76C)
多层印制电路板用极化直通插座（间距为（.100）印制电路组件和附件连接器（参见基底灭活通知）（取代MIL-C-55302/76C）

2004-11-12

现行

MIL MIL-DTL-55302/164D

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG AND/OR RECEPTACLE, 160 CONTACT POSTIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC (SUPERSEDING MIL-C-55302/164C)
印制电路板用160触点位置的印制电路组件和附件连接器 2.54 MM X 1.27 MM偏移网格 米制（取代MIL-C-55302/164C）

2004-07-08

现行

KS C IEC 60603-4

인쇄기판에 사용되는 3 MHz 이하 주파수용 커넥터 — 제4부: 중앙에 1.91 mm (0.075 in) 간격의 접점과 동일 간격의 지그재그 종단을 가진 기판용Two-part 커넥터
连接器 用于频率低于3MHz用于与印制电路板用 - 第4部分:两件式连接器具有以相同的间距为1.91毫米（0.075英寸）中心和交错线端子间隔开的接触印制电路板

2020-12-30

现行

SJ 50681/76-1994

ＳＭＣ系列（不接电缆）插针接触件印制电路板用２级射频同轴插座连接器详细规范
Connectors,receptacle,coaxial,radio frequency (series SMC(uncabled),pin contact,printed circuit,class 2),detail specification for

1994-09-30

现行

SJ 50681/59-1994

ＳＭＢ系列（不接电缆）插针接触件印制电路板用２级射频同轴插座连接器详细规范
Connectors,receptacle,coaxial,radio frequency (series SMB (uncabled),pin contact,printed circuit,class 2),detail specification for

1994-09-30

现行

SJ 50681/58-1994

ＳＭＡ系列（不接电缆）插孔接触件印制电路板用直角２级射频同轴插座连接器详细规范
Connectors,receptacle,electrical,coaxial,radio frequency (series SMA(uncabled),socket contact,printed circuit,right angle,class 2),detail specification for

1994-09-30

现行

MIL MIL-DTL-55302/77D

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PIN, RIGHT ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) (SEE BASE FOR INACTIVATION NOTICE) (SUPERSEDING MIL-C-55302/77C)
多层印制电路板用直角插针式印制电路组件和附件连接器（.100间距）（参见基底灭活通知）（取代MIL-C-55302/77C）

2004-11-12

现行

SJ 50681/77-1994

ＳＭＣ系列（不接电缆）插针接触件印制电路板用直角２级射频同轴插座连接器详细规范
Connectors,receptacle,coaxial,radio frequency (series SMC(uncabled),pin contact,printed circuit,right angle class 2),detail specification for

1994-09-30

现行

SJ 50681/60-1994

ＳＭＢ系列（不接电缆）插针接触件印制电路板用直角２级射频同轴插座连接器详细规范
Connectors,receptacle,coaxial,radio frequency(series SMB(uncabled),pin contact,printed circuit,right angle,class 2),detail specification for

1994-09-30

现行

MIL MIL-DTL-55302/141C

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG WITH PIN CONTACTS, 3 KEYING PINS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) (SUPERSEDING MIL-C-55302/141B)
印制电路板用连接器、印制电路组件和附件、带插针触点的插头、3个键控插针（.100英寸间距）（代替MIL-C-55302/141B）

2005-03-07

现行

MIL MIL-DTL-55302/117E

CONNECTORS, PRINTED CRICUIT SUBASSEMBLY AND ACCESSORIES: PLUG, RIGHT ANGLE, DECADE INCREMENT 20 THROUGH 110 AND 128 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 SPACING) (SUPERSEDING MIL-C-55302/117D)
印制电路组件和附件连接器:印制电路板（.050间距）用直角插头 十年增量20至110和128个接触位置（代替MIL-C-55302/117D）

2004-01-09