BS 6464:1984-工艺装置用增强塑料管、配件和接头规范-国家数字标准馆

现行 BS 6464:1984

到馆阅读

收藏跟踪

购买正版

Specification for reinforced plastics pipes, fittings and joints for process plants 工艺装置用增强塑料管、配件和接头规范

发布日期： 1984-09-28

规定了增强塑料管道的材料、性能、设计计算、制造、检查、测试和安装。交叉引用:BS 476:第7BS 1560:第2BS 1610BS 1755:第1BS 2044BS 2494BS 2782:第1:方法121ABS 2782:第3:方法320A至320FBS 2782:第4:方法345ABS 2782:第4:方法430BBS 2782:第10:方法1002BS 2782:第10:方法1003BS 3293BS 3396BS 3496BS 3505BS 3506BS 3532BS 3534BS 3691BS 3749BS 3757BS 3846BS 4346:方法1BS 4346:第3BS 4504:部分1BS5350部分C5BS 5350部分C6BS 5480BS 5955部分7

Specifies materials, properties, design calculations, manufacture, inspection, testing and installation of reinforced plastics pipelines.Cross References:BS 476:Part 7BS 1560:Part 2BS 1610BS 1755:Part 1BS 2044BS 2494BS 2782:Part 1:Method 121ABS 2782:Part 3:Methods 320A to 320FBS 2782:Part 4:Method 345ABS 2782:Part 4:Method 430BBS 2782:Part 10:Method 1001BS 2782:Part 10:Method 1002BS 2782:Part 10:Method 1003BS 3293BS 3396BS 3496BS 3505BS 3506BS 3532BS 3534BS 3691BS 3749BS 3757BS 3846BS 4346:Part 1BS 4346:Part 3BS 4504:Part 1BS 5350:Part C5BS 5350:Part C6BS 5480BS 5955:Part 7

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

KS M 3534(2019 Confirm)

유리 섬유 강화 플라스틱(GRP) 관의 이음관 및 연결구
纤维增强塑料管接头和接头

JIS K 7014-1997

Fittings and joints for fibre reinforced plastic pipes
纤维增强塑料管配件和接头

JIS K 7036-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints
塑料管道系统玻璃纤维增强热固性塑料（GRP）管和配件螺栓法兰接头设计的试验方法

改性酚醛玻璃纤维增强塑料管件技术条件
Specifications for pipe fittings of modified phenolic glass fiber reinforced plastics

GOST R 59834-2021

Промысловые трубопроводы. Трубы гибкие полимерные армированные и соединительные детали к ним. Общие технические условия
现场管道柔性增强塑料管和配件一般规格

MIL MIL-P-28584B Notice 1-Cancellation

PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, ADHESIVE BONDED JOINT TYPE, FOR CONDENSATE RETURN LINES (SUPERSEDING MIL-P-28584A) (NO S/S DOCUMENT)
冷凝水回流管线用玻璃纤维增强塑料胶粘接头型管道和管件（代替MIL-P-28584A）（无S/S文件）

MIL MIL-P-28584B

PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, ADHESIVE BONDED JOINT TYPE, FOR CONDENSATE RETURN LINES (SUPERSEDING MIL-P-28584A) (NO S/S DOCUMENT)
冷凝水回流管线用玻璃纤维增强塑料粘接型管道和管件（替代MIL-P-28584A）（无S/S文件）

UNE-EN 14364-2007+A1-2009

Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
带或不带压力的排水和污水用塑料管道系统.基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）.管道、配件和接头规范

JIS K 7042-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped rigid joints
塑料管道系统玻璃纤维增强热固性塑料（GRP）管及配件硬质或包裹硬质接头设计的试验方法

BS ISO 8533-2019

Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of cemented or wrapped joints
玻璃纤维增强热固性塑料（GRP）管道和配件证明胶结或包裹接头设计的试验方法

KS M ISO 8483(2019 Confirm)

유리 섬유 강화 열경화성 플라스틱(GRP) 관 및 이음관－볼트식 플랜지 연결구의 시험 방법
玻璃纤维增强热固性塑料（GRP）管和配件螺栓法兰接头设计验证试验方法

KS M ISO 8533(2019 Confirm)

유리 섬유 강화 열경화성 플라스틱(GRP) 관 및 이음관－접착 또는 적층 연결구의 시험 방법
玻璃纤维增强热固性塑料（GRP）管材和管件试验方法来证明粘合的或绕关节的设计

유리 섬유 강화 열경화성 플라스틱(GRP) 관 및 이음관 — 볼트식 플랜지 연결구의 시험방법
玻璃增强热固性塑料（GRP）管和配件.证明螺栓法兰接头设计的试验方法

유리섬유 강화 열경화성 플라스틱(GRP) 관 및 이음관 — 접착 또는 적층 연결구의 시험방법
玻璃增强热固性塑料（GRP）管和配件.证明粘结或包裹接头设计的试验方法

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints
用于压力和非压力排水和污水的塑料管道系统 - 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统 - 证明螺栓法兰接头设计的测试方法

BS ISO 8483-2019

Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of bolted flange joints
玻璃纤维增强热固性塑料（GRP）管道和配件证明螺栓法兰接头设计的试验方法

GOST R 55875-2013

Трубы и детали трубопроводов из реактопластов, армированных стекловолокном. Методы испытаний. Испытания болтового фланцевого соединения
玻璃钢热固性塑料（GRP）管和配件验证螺栓法兰接头设计的试验方法

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of cemented or wrapped joints
用于压力和非压力排水和污水的塑料管道系统 - 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统 - 证明胶结或包裹接缝设计的测试方法

BS EN 1119-2009

Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
塑料管道系统玻璃纤维增强热固性塑料（GRP）管和配件的接头带弹性密封件的非抗推力柔性接头的密封性和抗损坏性试验方法

UNE-EN 1119-2009

Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
塑料管道系统.玻璃纤维增强热固性塑料（GRP）管和配件的接头.带弹性密封件的非抗推力柔性接头的密封性和耐损坏性试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统