本文件规定了确定消防套件对环境影响的试验方法 结构木材构件的耐火性。 此类防火套件包括覆层、喷涂防火和反应涂层。 该方法适用于所有用于保护木材构件的防火套件。 这些可直接、全部或部分固定在木材构件上，并可包括气隙 在防火套件和木质构件之间，作为其设计的一个组成部分。 水平或垂直保护膜保护木结构的评估 分别是EN 13381-1或EN 13381-2的主题。 本试验方法适用于测定防火套件对承重木结构构件（包括地板、屋顶、墙壁、梁和柱）耐火性的贡献。 本文件包含防火试验，其中规定了为确定防火套件在规定厚度下延迟整个木构件温升的能力而进行的试验，根据本文规定的程序，当暴露在标准温度/时间曲线下时，确定防火套件在规定厚度下保持连贯性并固定在木材构件上的能力，并提供确定受保护试验构件炭化率的数据。 本文件不适用于根据EN 13501-2对测试组件进行分类。 将反应保护材料置于阴燃温度-时间-火灾曲线下的试验和特殊情况详见附录G。 根据EN 1995-1-2中给出的程序，火灾试验方法规定了数据的收集和呈现，这些数据可作为计算木材构件耐火性的直接输入。 附录B中给出了本试验方法与EN 1995-1-2结果评估之间关系的说明，以及根据该标准使用本试验方法的指南。 本文件还包含评估，该评估指出了应如何对测试数据进行分析，并为插值程序提供了指导。 定义了火灾试验评估结果的适用范围，以及将结果直接应用于具有规定厚度和所用防火套件固定的不同木结构。 交叉引用:EN 14080EN 1365-1EN 338EN ISO 2808EN 13381-8EN 15425EN 12467EN 823ISO 8421-2EN ISO 13943EN 1363-2ISO 834-12EN 14081-1EN 13162EN 301EN 1365-2EN 1365-3EN 1363-1EN 1995-1-1EN 13381-1EN 1995-1-2:2004/AC:2006EN 13381-3EN 13381-3EN 13381-2EN 13381-2EN 13381-6EN 13381-5EN 60584-1EN 13381-4EN ISO 9229EN 14279购买时可用的所有现行修订均包括在内购买了这份文件。

This document specifies test methods for determining the contribution of fire protection kits to the fire resistance of structural timber members. Such fire protection kits include claddings, sprayed fire protection and reactive coatings. The method is applicable to all fire protection kits used for the protection of timber members. These can be fixed directly, totally or in part, to the timber member and can include an air gap between the fire protectionkit and the timber member, as an integral part of its design. Evaluation of timber constructions protected by horizontal or vertical protective membranes are the subject of EN 13381-1 or EN 13381-2 respectively. The test method is applicable to the determination of the contribution of fire protection kits to the fire resistance of loadbearing timber structural members including floors, roofs, walls, beams and columns. This document contains the fire test which specifies the test to be carried out to determine the ability of the fire protection kit at a specified thickness to delay the temperature rise throughout the timber member, to determine the ability of the fire protection kit at a specified thickness to remain coherent and fixed to the timber member and to provide data for determining the charring rate of the protected test member, when exposed to the standard temperature/time curve according to the procedures defined herein. This document is not appropriated to classify the tested assembly according to EN 13501-2. The test to subject reactive protection material to a smouldering temperature time fire curve and the special circumstances for this are detailed in Annex G. The fire test methodology makes provision for the collection and presentation of data which can be used as direct input to the calculation of fire resistance of timber members in accordance with the procedures given in EN 1995-1-2. A description of the relationship of this test method and the assessment of the results obtained therefrom to EN 1995-1-2 and guidelines for the use of this test method in accordance with that standard are given in Annex B. This document also contains the assessment which indicates how the analysis of the test data should be made and gives guidance to the procedures by which interpolation should be undertaken. The limits of applicability of the results of the assessment arising from the fire test are defined, together with the direct application of the results to different timber constructions with the specified thickness and fixation of the applied fire protection kit tested.Cross References:EN 14080EN 1365-1EN 338EN ISO 2808EN 13381-8EN 15425EN 12467EN 823ISO 8421-2EN ISO 13943EN 1363-2ISO 834-12EN 14081-1EN 13162EN 301EN 1365-2EN 1365-3EN 1363-1EN 1995-1-1EN 13381-1EN 1995-1-2:2004/AC:2009EN 1995-1-2:2004/AC:2006EN 13381-3EN 13381-2EN 13381-6EN 13381-5EN 60584-1EN 13381-4EN 1365-4EN ISO 9229EN 14279All current amendments available at time of purchase are included with the purchase of this document.