BS EN 1918-3:2016涵盖了设计、施工、测试的功能建议， 中国地下储气库（UGS）设施的调试、运行、维护和废弃 溶浸开采的盐穴，包括井口。它规定了安全和环境可接受的做法。对于地下储气所需的地面设施，EN 1918-5适用。在这种情况下，“气体”是指任何碳氢燃料:在15°C的温度和0.1 MPa的压力下处于气态（包括天然气） 天然气、压缩天然气（CNG）和液化石油气（LPG）。存储的产品也被命名为 液体）；满足特定质量要求，以保持地下仓库的完整性， 性能、环境兼容性，并满足合同要求。本欧洲标准规定了地下储气设施的通用基本原则。这个网站的用户 欧洲标准应意识到存在更详细的标准和/或实践规范。非消耗性的 相关标准清单见附录A。本欧洲标准旨在与这些国家标准和/或规范一起使用 练习而不是取代它们。如果国家立法/法规中的限制性要求与 如图所示，以本欧洲标准、国家立法/法规的要求为准 在CEN/TR 13737（所有部分）中。 注:CEN/TR 13737（所有部分）包含:一个国家适用的相关立法/法规的澄清；适当时，应满足更严格的国家要求；获取最新信息的国家联络点。本欧洲标准不适用于现有设施。交叉引用:EN 1918-5EN 1127-1EN 12954EN 13509EN 14505EN 15112CEN/TR 13737-1CEN/TR 13737-2EN ISO 10405EN ISO 10417EN ISO 10423EN ISO 10424-1EN ISO 10424-2EN ISO 10427-1EN ISO 10427-2EN ISO 10427-3EN ISO 10432EN ISO 10870ISO 10870EN ISO 11960EN ISO 11961EN ISO 13500EN ISO 13533EN ISO 13534EN ISO 14310EN ISO 15463EN ISO 16070EN ISO 17078ISO 5596ISO 10414-1ISO 10945ISO 10946EN13501ISO 13535ISO 17824ISO 28781ISO/TR 10400购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN 1918-3:2016 covers the functional recommendations for design, construction, testing, commissioning, operation, maintenance and abandonment of underground gas storage (UGS) facilities in solution-mined salt caverns up to and including the wellhead.It specifies practices which are safe and environmentally acceptable.For necessary surface facilities for underground gas storage, EN 1918-5 applies.In this context "gas" is any hydrocarbon fuel:which is in a gaseous state at a temperature of 15 °C and under a pressure of 0,1 MPa (this includes natural gas, compressed natural gas (CNG) and liquefied petroleum gas (LPG). The stored product is also named fluid);which meets specific quality requirements in order to maintain underground storage integrity, performance, environmental compatibility and fulfils contractual requirements.This European Standard specifies common basic principles for underground gas storage facilities. Users of this European Standard should be aware that more detailed standards and/or codes of practice exist. A nonexhaustive list of relevant standards can be found in Annex A.This European Standard is intended to be applied in association with these national standards and/or codes of practice and does not replace them.In the event of conflicts in terms of more restrictive requirements in the national legislation/regulation with the requirements of this European Standard, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).NOTE CEN/TR 13737 (all parts) contains:clarification of relevant legislation/regulations applicable in a country;if appropriate, more restrictive national requirements;national contact point for the latest information.This European Standard is not intended to be applied retrospectively to existing facilities.Cross References:EN 1918-5EN 1127-1EN 12954EN 13509EN 14505EN 15112CEN/TR 13737-1CEN/TR 13737-2EN ISO 10405EN ISO 10417EN ISO 10423EN ISO 10424-1EN ISO 10424-2EN ISO 10427-1EN ISO 10427-2EN ISO 10427-3EN ISO 10432EN ISO 10870ISO 10870EN ISO 11960EN ISO 11961EN ISO 13500EN ISO 13533EN ISO 13534EN ISO 14310EN ISO 15463EN ISO 16070EN ISO 17078ISO 5596ISO 10414-1ISO 10416ISO 10945ISO 10946ISO 13501ISO 13535ISO 17824ISO 28781ISO/TR 10400All current amendments available at time of purchase are included with the purchase of this document.