ISO 3203:1993-航空和航天；螺栓标准双六角头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸 -国家数字标准馆

现行 ISO 3203:1993

到馆提醒

收藏跟踪

购买正版

Aerospace — Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions 航空和航天；螺栓标准双六角头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

发布日期： 1993-12-23

                指定配置、尺寸和公差。用于制定航空航天产品标准。

Specifies configuration, dimensions and tolerances. Is intended for the drawing up of aerospace product standards.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 49.030.20航空航天制造用紧固件 - 螺栓、螺钉、螺柱

关联关系

研制信息

归口单位： ISO/TC 20/SC 4

相似标准/计划/法规

Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
螺栓标准双六角头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

Aerospace — Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 275 MPa — Dimensions
航空和航天；有涂层或无涂层的金属材料长MJ螺纹、标准或中径杆、缩径双六角头螺栓强度等级小于或等于1 275 MPa——尺寸

KS W ISO 9254(2020 Confirm)

항공 우주－강도 등급 1 100 MPa 이하, 금속재, 코팅한 또는 코팅하지 않은, 일반 또는 유효 지름 섕크, 긴 길이 MJ 나사, 일반 스플라인 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的金属材料有涂层或无涂层长MJ螺纹标准花键头标准或中径柄螺栓－尺寸

Aerospace — Bolt, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺栓标准花键头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa. Dimensions
有涂层或无涂层、金属材料制、标准或中径杆、长MJ螺纹、缩径双六角头螺栓强度等级小于或等于1275 MPa 尺寸

UNE-EN 2870-1997

AEROSPACE SERIES. BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2, LUBRICATED. CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 ºC.
航空航天系列钛合金短螺纹紧公差标准杆标准双六角头阳极氧化MOS2润滑螺栓分类:1100兆帕（环境温度）/315ºC

BS ISO 3185-2021

Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
航空航天螺栓标准双六角头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

Aerospace — Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空航天 - 螺栓普通双六角头正常柄短或中等长度MJ螺纹金属材料涂层或未涂层强度等级小于或等于1 100 MPa - 尺寸

Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
螺栓标准花键头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

BS 05/30128674 DC

ISO 3185. Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium-length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
ISO 3185 航空航天螺栓标准双六角头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

KS W ISO 9256(2020 Confirm)

항공 우주－강도 등급 1 100 MPa 이하, 금속재, 일반 또는 유효 지름 섕크, 긴 길이 MJ 나사, 큰 6각 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层金属材料长MJ螺纹标准或中径柄大六角头螺栓－尺寸

Aerospace — Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；大六角头螺栓标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

BS ISO 3186-2008

Aerospace. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa. Dimensions
航空航天有涂层或无涂层的金属材料短或中等长度MJ螺纹标准柄大双六角头螺栓强度等级1250 MPa至1800 MPa 尺寸

Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 Â°C; German version EN 2870:1996
航空航天系列.阳极氧化 MoS<（索引）2>润滑的钛合金制短螺纹紧公差标准杆标准双六角头螺栓.等级:1100MPa（环境温度）/315℃；德文版EN 2870:1996

Aerospace — Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa — Dimensions
航空和航天；有涂层或无涂层的金属材料短或中长MJ螺纹标准柄大双六角头螺栓强度等级为1 250 MPa至1 800 MPa——尺寸

Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
大六角头螺栓标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

BS EN 3444-2006

Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1250 MPa (at ambient temperature) / 650°C
航空航天系列钝化耐热镍基合金制中长螺纹紧公差标准杆大六角头螺栓分类:1250兆帕（环境温度）/650摄氏度

BS 05/30128689 DC

ISO 3186. Aerospace. Bolts, large bihexagonal head, normal shank, short or medium-length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa. Dimensions
ISO 3186 航空航天螺栓大双六角头标准杆短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级1 250 MPa至1 800 MPa 尺寸

UNE-EN 2874-1997

AEROSPACE SERIES. BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED. CLASSIFICATION: 1 550 MPA (AT AMBIENTE TEMPERATURE)/315 ºC.
航空航天系列钝化耐热镍基合金制中长螺纹紧公差标准杆大六角头螺栓分类:1550MPa（环境温度）/315ºC

BS EN 4498-2005

Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: 1 550 MPa (at ambient temperature) / 315 °C
航空航天系列螺栓大六角头紧公差标准杆中等长度螺纹耐热镍基合金制钝化铝着色涂层分类:1550兆帕（环境温度）/315摄氏度

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统