AWWA C220-17-1/2英寸（13毫米）及以上不锈钢管-国家数字标准馆

现行 AWWA C220-17

到馆提醒

收藏跟踪

购买正版

Stainless Steel Pipe 1/2 IN (13mm) and Larger 1/2英寸（13毫米）及以上不锈钢管

发布日期： 2017-11-01

本标准适用于无缝、纵缝或螺旋缝焊接的不锈钢管；1/2英寸。（13 mm）公称直径及以上；用于输送和分配饮用水、废水和再生水，以及用于其他供水系统设施。本标准可在采购和接收文件中引用，也可作为1/2英寸不锈钢管的制造指南。（13毫米）及以上。本标准的规定适用于引用本文件时，且仅适用于1/2英寸的不锈钢管。（13毫米）及以上。

This standard pertains to stainless-steel pipe that is seamless, longitudinalseam, or spiral-seam welded; 1/2 in. (13 mm) in nominal diameter and larger; and intended for the transmission and distribution of potable water, wastewater, and reclaimed water, and for use in other water-supply system facilities.This standard can be referenced in documents for purchasing and receiving, as well as serving as a guide for manufacturing, stainless-steel pipe, 1/2 in. (13 mm) and larger. The stipulations of this standard apply when this document has been referenced and then only to stainless-steel pipe, 1/2 in. (13 mm) and larger.

分类信息

发布单位或类别：美国-美国给水工程协会

关联关系

研制信息

相似标准/计划/法规

Steel Water Pipe - 6 in. (150 mm) and Larger, Includes Update No. 1 (April 2018) and Update No. 2 (December 2019)
钢制水管-6英寸（150毫米）及以上包括第1次更新（2018年4月）和第2次更新（2019年12月）

AWS B2.1-8-212-2001(R2012)

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的钨极气体保护焊标准焊接工艺规范（WPS）厚 ER3XX 焊接状态主要用于管道应用

AWS B2.1-8-215-2001(R2012)

Gas Tungsten Arc Welding With Consumable Insert Root of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）自耗镶块根部的钨极气体保护焊 IN3XX和ER3XX 焊接状态主要用于管道应用

AWS B2.1-1/8-230-2002-AMD1(R2013)

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, IN309 and ER309(L), As-Welded Condition, Primarily Pipe Applicati
用碳钢（M-1/P-1/S-1 第1或2组）自耗镶块根部与奥氏体不锈钢（M-8/P-8/S-8 第1组）进行钨极气体保护焊的标准焊接工艺规范（SWPS） 1/16至1-1/2英寸厚 IN309和ER309（L）焊态主要用于管道应用

AWS B2.1-8-213-1997(R2012)

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（WPS）厚 ER3XX-XX 焊接状态主要用于管道应用

AWS B2.1-8-216-2001(R2012)

Gas Tungsten Arc Welding With Consumable Insert Root Followed by Shieded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
焊接状态下 1/8至1-1/2英寸厚、IN3XX和ER3XX的奥氏体不锈钢（M-8/P-8/S-8 第1组）的自耗镶块根部钨极气体保护焊然后进行屏蔽金属极电弧焊主要用于管道应用

AWS B2.1-8-214-2001(R2012)

Standard Welding Procedure Spec (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS）厚 ER3XX ER3XX-XX 焊接状态主要用于管道应用

1A1W1S1 Archive Product 457

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚、MIL-3XX、焊态主要用于海军应用的奥氏体不锈钢（S-8）钨极气体保护焊的海军应用标准焊接工艺规范（SWPS-N）

1A1W1S1 Archive Product 517

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N）在焊接状态下采用1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的MIL-3XX奥氏体不锈钢（S-8）自耗镶块根部进行钨极气体保护焊主要用于海军应用的管道

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统