BS ISO 5600:2017规定了静态硫化粘合强度的测定方法 从橡胶化合物到硬质材料。试件由刚性管的两个锥形端组成 材料，由一个橡胶圆筒连接。粘合力是通过粘合系统获得的，该粘合系统不仅可以包括刚性材料，还可以包括 橡胶化合物，但其他元素，如薄合金涂层或刚性零件的化学处理 或者是单一水泥，或者是底漆和覆盖水泥。用于制备聚合物的键合系统 用户应充分指定试样，但本文件中规定了 评估与复杂粘接系统相关的不同类型的故障。该方法主要用于在标准条件下在实验室制备的试样 为了为粘接系统及其组件的开发和控制提供数据 作为水泥或特殊橡胶化合物，以及制造方法。虽然打算应用 如果橡胶粘合到刚性支撑件上，则可能不包括支撑件， 虽然采用高模量材料，但由于横向尺寸较小，因此刚性较低，如 由橡胶粘合到金属线、绳索或薄板上。交叉引用:ISO 18899:2013 ED2ISO 23529:2016ISO 5893:2002 Ed 3购买时可用的所有当前修订版均包含在本文件的购买中。

BS ISO 5600:2017 specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber.The adhesion is obtained by a bonding system which can include not only the rigid material and the rubber compound, but other elements such as thin alloy coatings or chemical treatments of rigid parts and either a single cement or both primer and cover cements. The bonding system for preparing the test pieces should be adequately specified by the user, but provision is made in this document for the evaluation of different types of failure related to a complex bonding system.The method is designed primarily for test pieces prepared in the laboratory under standard conditions in order to provide data for development and control of bonding systems and their components, such as cements or special rubber compounds, and of methods of manufacture. While intended to be applied where the rubber is bonded to rigid supporting pieces, it might not cover such cases where the support, although of high-modulus material, has a low rigidity due to small transverse dimensions, as in the case of rubber bonded to metal wires, cords or thin sheets.Cross References:ISO 18899:2013 ED2ISO 23529:2016ISO 5893:2002 Ed 3All current amendments available at time of purchase are included with the purchase of this document.