现行

GOST ISO 12777-1-2020

Поддоны. Методы испытаний соединений. Часть 1. Определение сопротивления изгибу гвоздей и крепежных деталей
托盘 托盘接头的试验方法 第1部分 托盘钉子和紧固件抗弯强度的测定

现行

KS T ISO 12777-1(2018 Confirm)

파렛트 접합부 시험방법－제1부：파렛트 못, 기타 맞춤 형태 파스너와 스테이플의 휨 강도 측정방법
托盘接头试验方法第1部分:托盘钉子、其他销钉式紧固件和钉书钉抗弯性的测定

2008-09-13

现行

KS T ISO 12777-1(2023 Confirm)

파렛트 접합부 시험방법－제1부：파렛트 못, 기타 맞춤 형태 파스너와 스테이플의 휨 강도 측정방법
托盘接头的试验方法第1部分:托盘钉、其他榫钉型紧固件和U形钉抗弯性的测定

2008-09-13

现行

ISO 12777-1-1994

Methods of test for pallet joints — Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
托盘接头的试验方法第1部分:托盘钉、其他销钉型紧固件和U形钉抗弯性的测定

1994-12-15

现行

ISO 12777-1-1994/Amd 1-2008

Methods of test for pallet joints — Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples — Amendment 1
托盘接头的试验方法.第1部分:托盘钉子 其他销型紧固件和订书钉抗弯曲性的测定.修改件1

2008-10-29

现行

KS T ISO 12777-3

파렛트 접합부 시험방법 —제3부: 파렛트 접합부 강도 측정방법
托盘接头测试方法 - 第3部分:托盘接头强度的测定

2020-12-31

现行

ISO 12777-3-2002

Methods of test for pallet joints — Part 3: Determination of strength of pallet joints
托盘接头试验方法第3部分:托盘接头强度的测定

2002-12-02

现行

UNE-EN ISO 12777-1-1997

METHODS OF TEST FOR PALLET JOINTS. PART 1: DETERMINATION OF BENDING RESISTANCE OF PALLET NAILS, OTHER DOWEL-TYPE FASTENERS AND STAPLES. (ISO 12777-1:1994).
托盘接头的试验方法 第1部分:托盘钉、其他销钉式紧固件和订书钉抗弯曲性的测定 （ISO 12777-1:1994）

1997-04-14

现行

BS EN ISO 12777-1-1996+A1-2008

Methods of test for pallet joints-Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
托盘接头的试验方法

2009-07-31

现行

UNE-EN ISO 12777-3-2003

Methods of test for pallet joints - Part 3: Determination of strength of pallet joints. (ISO 12777-3:2002)
托盘接头的试验方法.第3部分:托盘接头强度的测定 （ISO 12777-3-2002）

2003-03-28

现行

DIN EN ISO 12777-3

Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002)
托盘接头的试验方法第3部分:托盘接头强度的测定；德文版EN ISO 12777-3:2002

2003-06-01

现行

KS T ISO 12777-2

파렛트 접합부 시험방법 —제2부: 파렛트 못, 스테이플의 뽑기 저항 및 못의 머리 뽑기 저항 측정방법
托盘接头测试方法 - 第2部分 - 托盘钉和订书钉的拔出和头部穿透阻力测定

2020-12-31

现行

ISO 12777-2-2000

Methods of test for pallet joints — Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples
托盘接头的试验方法第2部分:托盘钉子和订书钉抗拔出和头部穿透的测定

2000-04-13

现行

UNE-EN ISO 12777-2-2000

Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples. (ISO 12777-2:2000)
托盘接头的试验方法.第2部分:托盘钉子和订书钉抗拔出和头部穿透的测定 （ISO 12777-2-2000）

2000-12-19

现行

HB 5352.1-2004

熔模铸造型壳性能试验方法 第1部分:抗弯强度的测定
Test method for properties of investment casting shell-Part 1:Determination of bending strength

2004-09-01

现行

IEC 62137-1-4-2009

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test
表面贴装技术 - 表面贴装焊接接头的环境和耐久性试验方法 - 第1-4部分:循环弯曲试验

2009-01-26

现行

KS C 62137-1-4

표면실장기술 — 표면실장 솔더 접합부에 대한 환경 및 내구성 시험방법 — 제1-4부: 반복 굽힘 시험
表面安装技术表面安装焊点的环境和耐久性试验方法第1-4部分:循环弯曲试验

2024-06-07

现行

DIN 53123-1

Testing of paper and board - Determination of the bending stiffness - Part 1: Length of natural frequency method
纸和纸板的试验.弯曲刚度的测定.第1部分:固有频率长度法

2005-04-01

现行

DIN EN 14187-1

Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure
冷用接缝密封剂.试验方法.第1部分:固化速率的测定

2017-08-01

现行

UNE-EN 14187-1-2004

Cold applied joint sealants - Part 1:Test method for the determination of rate of cure
冷用接缝密封剂.第1部分:固化率测定的试验方法

2004-03-12