Standard No. 5 Propeller Shaft and Engine Nose
标准5号传动轴和发动机机头

1947-12-05

Standard No. 4 Propeller Shaft and Engine Nose
4号标准传动轴和发动机机头

1947-12-05

Standard No. 6 Propeller Shaft and Engine Nose
6号标准传动轴和发动机机头

1947-12-05

Standard No. 3 Propeller Shaft and Engine Nose
3号标准传动轴和发动机机头

1948-03-25

Standard No. 2 Propeller Shaft and Engine Nose
标准2号传动轴和发动机机头

1948-03-25

Std. No.1 Propeller Shaft (with Unified Screw Threads)
标准1号传动轴（带统一螺纹）

1953-01-21

Standard No. 5/7 Counter Rotating Propeller Shafts & Engine Nose
标准5/7号反向旋转螺旋桨轴和发动机机头

1948-06-11

Gauging Systems for A|D|S Standard Propeller Shaft & Hub Serrations
A | D | S标准传动轴和轮毂锯齿的测量系统

1949-08-26

선내 기관 탑재 소형 선박-1/10 테이퍼를 갖는 프로펠러 축 단 및 보스
小艇与内侧发动机螺旋桨轴端和轴毂1/10锥度

2005-03-19

Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper
带内置发动机的小艇——具有1:16锥度的传动轴端部和轮毂

1994-12-08

Small craft with inboard engine — Propeller shaft ends and bosses with 1:10 taper
带内置发动机的小艇——具有1:10锥度的传动轴端部和轮毂

1992-12-03

Standard 51/2 / 71/2 Counter Rotating Propeller Shafts & Engine Nose
标准51/2/71/2反向旋转螺旋桨轴和发动机机头

1948-06-11

Standard No. 4/6 Counter Rotating Propeller Shafts (Integral Bearing Race) & Engine Nose
标准4/6号反向旋转螺旋桨轴（整体轴承座圈）和发动机机头

2015-12-03

Standard No. 4/6 Counter Rotating Propeller Shafts (Separate Bearing Race) & Engine Nose
标准4/6号反向旋转螺旋桨轴（独立轴承座圈）和发动机机头

2015-12-03

PROPELLER SHAFT END, FLANGED TYPE - NO. 1, 2, 3, 4, 5, & 6 (Stabilized: May 2018)
传动轴端 法兰式-1号、2号、3号、4号、5号和6号（稳定:2018年5月）

2018-05-07

SMALL CRAFT WITH INBOARD ENGINE. PROPELLER SHAFT ENDS AND BOSSES WITH 1:10 TAPER. (ISO 4566:1992).
带内置发动机的小艇 传动轴端部和轮毂的锥度为1:10 （ISO 4566:1992）

1997-09-30

Standard No.6 Propeller Shaft & Engine Nose (with Unified Screw Threads & Four-Line Oil System)
标准6号传动轴和发动机机头（带统一螺纹和四线机油系统）

1956-06-07

Safety Standard for Explosives, Propellants, and Pyrotechnics, w/Change 1 (2019-09-26)
炸药、推进剂和烟火安全标准 w/Change 1（2019-09-26）

2018-05-23

Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Supplement 1: Methodology for selecting machinery vibration standards, including the shaft vibration (ISO/TR 19201:2013)
机械振动通过非旋转部件的测量评估机器振动补充1:选择包括轴振动在内的机械振动标准的方法（ISO/TR 19201-2013）

2013-12-01

2000/361/EC: Commission Decision of 10 May 2000 on publication of the references of standards EN 1459:1999 'Safety of industrial trucks - Self-propelled variable reach trucks' and EN 1726-1:1999 'Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N - Part 1: General requirements' (notified under document number C(2000) 1174) (Text with E
2000/361/EC:2000年5月10日委员会关于发布标准EN 1459:1999“工业卡车的安全-自走式可变行程卡车”和EN 1726-1:1999“工业卡车的安全-容量小于等于10000 kg的自走式卡车和牵引杆拉力小于等于20000 N的工业拖拉机-第1部分:一般要求”参考文献的决定（根据C（2000）1174号文件通知）（带E的文本

2000-05-10