BS 10/30195915 DC-BS ISO 13056 塑料管道系统热水和冷水的压力系统真空下密封性的试验方法-国家数字标准馆

现行 BS 10/30195915 DC

到馆提醒

收藏跟踪

购买正版

BS ISO 13056. Plastics piping systems. Pressure systems for hot and cold water. Test method for leaktightness under vacuum BS ISO 13056 塑料管道系统热水和冷水的压力系统真空下密封性的试验方法

发布日期： 2010-03-05

购买本文件时可获得的所有当前修订均包含在购买本文件中。

All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

DIN EN ISO 13056

Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
塑料管道系统.冷热水压力系统.真空密封性试验方法（ISO 13056-2011）

BS 10/30188859 DC

BS ISO 19892. Plastics piping systems. Systems for hot and cold water. Test method for leaktightness under vacuum
BS ISO 19892 塑料管道系统热水和冷水系统真空下密封性的试验方法

BS 10/30228360 DC

BS EN ISO 15874-5. Plastics piping systems for hot and cold water installations. Polypropylene (PP). Part 5. Fitness for purpose of the system
BS EN ISO 15874-5 冷热水装置用塑料管道系统聚丙烯（PP）第五部分系统适用性

DIN EN ISO 19892

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
塑料管道系统.冷热水用热塑性塑料管和配件.接头耐压力循环的试验方法（ISO 19892-2011）

BS 10/30228348 DC

BS EN ISO 15874-1. Plastics piping systems for hot and cold water installations. Polypropylene (PP). Part 1. General
BS EN ISO 15874-1 冷热水装置用塑料管道系统聚丙烯（PP）第一部分全体的

BS 05/30127626 DC

ISO/DIS 19892. Plastics piping systems. Thermoplastics pipes and associated fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
ISO/DIS 19892 塑料管道系统冷热水用热塑性塑料管及相关配件接头耐压力循环的试验方法

BS 08/30170172 DC

BS ISO 22391-2. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Part 2. Pipes
BS ISO 22391-2 冷热水装置用塑料管道系统耐高温聚乙烯（PE-RT）第二部分管

BS 12/30264198 DC

BS EN ISO 11296-7. Plastics piping systems for renovation of underground non pressure drainage and sewerage networks. Lining with spirally-wound pipes
BS EN ISO 11296-7 地下无压排水和污水管网改造用塑料管道系统内衬螺旋缠绕的管道

BS 08/30170178 DC

BS ISO 22391-5. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Part 5. Fitness for purpose of the system
BS ISO 22391-5 冷热水装置用塑料管道系统耐高温聚乙烯（PE-RT）第五部分系统适用性

BS 10/30209317 DC

BS ISO 11296-7. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 7. Lining with spirally-wound pipes
BS ISO 11296-7 地下无压排水和污水管网改造用塑料管道系统第七部分内衬螺旋缠绕的管道

BS 08/30174001 DC

BS ISO 11296-3. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 3. Lining with close-fit pipes
BS ISO 11296-3 地下无压排水和污水管网改造用塑料管道系统第三部分内衬紧密贴合的管道

BS 08/30170168 DC

BS ISO 22391-1. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Part 1. General
BS ISO 22391-1 冷热水装置用塑料管道系统耐高温聚乙烯（PE-RT）第一部分全体的

BS 06/30151164 DC

BS EN ISO 15877-1. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Part 1. General
BS EN ISO 15877-1 冷热水装置用塑料管道系统氯化聚氯乙烯（PVC-C）第一部分全体的

BS 09/30175820 DC

BS ISO 22621-5. Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA). Part 5. Fitness for purpose of the system
BS ISO 22621-5 最大工作压力不超过2 MPa（20 bar）的气体燃料供应用塑料管道系统聚酰胺（PA）第五部分系统适用性

BS 08/30168675 DC

BS EN ISO 1452-2. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). Part 2. Pipes
BS EN ISO 1452-2 供水、埋地和地上压力排水和排污用塑料管道系统未增塑聚氯乙烯（PVC U）第二部分管

BS 10/30228634 DC

BS EN ISO 1452-5. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Part 5. Fitness for purpose of the system
BS EN ISO 1452-5 供水、埋地和地上压力排水和排污用塑料管道系统未增塑聚氯乙烯（PVC-U）第五部分系统适用性

AS/NZS 2537.3-2011

Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications, Part 3: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system (ISO 15875-5:2003, MOD)
压力用交联聚乙烯（PE-X）机械连接配件第3部分:冷热水装置用塑料管道系统交联聚乙烯（PE-X）系统适用性

BS 10/30228627 DC

BS EN ISO 1452-3. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Part 3. Fittings
BS EN ISO 1452-3 供水、埋地和地上压力排水和排污用塑料管道系统未增塑聚氯乙烯（PVC-U）第三部分配件

BS 08/30185535 DC

BS EN ISO 1452-1. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). Part 1. General
BS EN ISO 1452-1 供水、埋地和地上压力排水和排污用塑料管道系统未增塑聚氯乙烯（PVC U）第一部分全体的

BS 08/30168684 DC

BS EN ISO 1452-3. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly (vinyl chloride) (PVC U). Part 3. Fittings
BS EN ISO 1452-3 供水、埋地和地上压力排水和排污用塑料管道系统未增塑聚氯乙烯（PVC U）第三部分配件

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统