BS ISO 16301:2017规定了三类钢丝或织物增强液压系统的要求 标称尺寸在5到25之间的软管和软管组件。软管和软管总成如下所示: 用于带有手动泵的液压千斤顶应用。它们适合与其他产品一起使用 液压油HH、HL、HM、HR和HV，温度范围为-40°C至+55°C。对于 需要重型服务，如救援工具，ISO 19718[3]适用。本文件不包括连接端的要求。它仅限于表演 软管和软管组件的制造。软管组件的最大工作压力由 部件的最低最大工作压力。交叉引用:ISO 6803:2017ISO 10619-1:2011 Ed 1ISO 6743-4:2015ISO 1817:2015 ED6ISO 1402:2009 Ed 4ISO 8331:2016ISO 4671:2007 Ed 3ISO 7326:2016ISO 8330:2014 ED3ISO 10619- 2:2011 Ed 1ISO 4413ISO 19718ISO 6743-4:2015购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS ISO 16301:2017 specifies the requirements for three classes of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 25. The hoses and hose assemblies are used in hydraulic jack applications with manually operated hand pumps. They are suitable for use with hydraulic fluids HH, HL, HM, HR and HV at temperature ranging from -40 °C to +55 °C. For tools that require heavy duty services such as a rescue tool, ISO 19718 [ 3 ] applies.This document does not include requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The maximum working pressure of hose assemblies is regulated by the lowest maximum working pressure of the components.Cross References:ISO 6803:2017ISO 10619-1:2011 Ed 1ISO 6743-4:2015ISO 1817:2015 ED6ISO 1402:2009 Ed 4ISO 8331:2016ISO 4671:2007 Ed 3ISO 7326:2016ISO 8330:2014 ED3ISO 10619-2:2011 Ed 1ISO 4413ISO 19718ISO 6743-4:2015All current amendments available at time of purchase are included with the purchase of this document.