首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
历史 ASTM F1555-94(2007)
到馆提醒
收藏跟踪
购买正版
Standard Guide for Characteristics for Extremity Splints 肢体夹板特征标准指南
发布日期: 2007-02-01
1.1本指南涵盖了设备的最低标准,此处指定为肢体夹板,通常称为夹板。肢体夹板用于紧急医疗服务人员固定肢体。 1.2本指南不确定通过在患者身上放置解脱装置(ED)实现的特定运动限制程度。在医院外环境中固定四肢的明确要求,特别是在医院外环境中使用ED的限制程度,尚未在医学文献中确定。 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。 ====意义和用途====== 本指南旨在确定ES应具备的特征。 不同的临床情况可能需要不同的设备组合来充分固定肢体,包括牵引或气动设备,或两者兼有。 用于成年患者的设备应适合第95百分位成年美国男性。 标记为拟用于儿科的设备不得用于容纳成年患者。
1.1 This guide covers minimum standards for devices, designated here as extremity splint(s) (ES), commonly known as splints. Extremity splints are designed to be used for the immobilization of an extremity by emergency medical service personnel. 1.2 This guide does not identify specific degrees of limitation of motion achieved by placement of a extrication device (ED) on a patient. Definitive requirements for immobilization of extremities in the out of hospital environment, and, in particular, the degree of limitation associated with the use of an ED in the out of hospital setting, have not been established in the medical literature. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== The intent of this guide is to identify characteristics that an ES should possess. Varied clinical situations may require differing combinations of devices for adequate extremity immobilization, including traction or pneumatic devices, or both. A device intended for use with adult patients shall accommodate the 95th percentile adult American male. Devices that are labeled as intended for pediatric use shall not be required to accommodate adult patients.
分类信息
关联关系
研制信息
归口单位: F30.01
相似标准/计划/法规
现行
ASTM D2893-24
Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
极压润滑油氧化特性的标准试验方法
2024-07-01
现行
ASTM E3144-19
Standard Guide for Reporting the Physical and Chemical Characteristics of Nano-Objects
报告纳米物体物理和化学特性的标准指南
2019-09-01
现行
ASTM E3206-19
Standard Guide for Reporting the Physical and Chemical Characteristics of a Collection of Nano-Objects
报告纳米物体集合的物理和化学特性的标准指南
2019-11-15
现行
ASTM D2646-24
Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings
绒线地板覆盖物的背衬织物特性的标准指南
2024-01-01
现行
ASTM E1324-21
Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
用于测量超声波检测仪器的一些电子特性的标准指南
2021-06-01
现行
ASTM E1653-94(2021)
Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
光辐射传输光纤波导动态特性规定的标准指南
2021-09-01
现行
ASTM E2491-23
Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
评定相控阵超声检测仪器和系统性能特性的标准指南
2023-06-01
现行
ASTM E2872-14(2024)
Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
在风洞设备中用激光衍射仪测定喷雾横截面平均特性的标准指南
2024-02-01
现行
ASA S2.20-1983(R2020)
American National Standard for Estimating Airblast Characteristics for Single Point Explosions in Air, With a Guide to Evaluation of Atmospheric Propagation and Effects
美国估算空气中单点爆炸气流特性的国家标准 以及大气传播和影响评估指南
1983-01-01