BS EN 15316-4-1:2017是一系列系统能量计算方法标准的一部分 空间供暖系统和生活热水系统的要求和系统效率。本标准（EN 15316-4-1）规定:所需输入；计算方法；产生的产出；一种考虑基于燃料的发热装置能量性能的方法 燃烧 用于燃烧子系统（锅炉、生物质）产生的空间供暖，包括控制。本标准规定了以下计算方法:供暖和家用热水发电系统的热损失；供暖和生活热水对空间供暖的可回收热损失 发电系统；供暖和家用热水发电系统的辅助能源。 本标准规定了水基发热子系统的能源性能计算 包括基于燃料燃烧的控制（“锅炉”），以常规化石燃料为燃料运行 以及可再生燃料。本标准不包括锅炉的尺寸或检查。本标准也适用于供暖或家用热水器组合使用的热发生器 水、通风、冷却和加热。仅考虑家用热水发电机 进入M8-8部分。本欧洲标准是关于燃烧发电子系统（锅炉、， 生物质），也用于生产生活热水和/或空间供暖。这些值是根据EN ISO 52000计算总能耗的输入数据- 1和 EN 15316-1。表1显示了本标准在环境保护局标准中的相对位置 模块化结构如EN ISO 52000-1所述。注1:在CEN ISO/TR 52000-2中，可以找到相同的表格，每个模块的 已发布或正在编制的相关EPB标准和随附技术报告。注2:模块代表EPB标准，尽管一个EPB标准可能涵盖多个模块 一个模块可能包含在多个EPB标准中，例如简化和详细的方法 分别地另见第2条和表A.1和B.1。交叉引用:EN ISO 52000-1EN ISO 13790（ISO 13790:2008）ASISO 13790:2008 Ed 2 CEN/TR 15316-6-4:2017EN ISO 9488（ISO 9488: 1999年通过）EN 15316-3:2017EN 15316-1:2017EN 15316-2:2017购买本文件时可用的所有当前修订版均包含在购买本文件中。

BS EN 15316-4-1:2017 is part of a series of standards on the method for calculation of system energy requirements and system efficiencies of space heating systems and domestic hot water systems.This standard (EN 15316-4-1) specifies:required inputs;a calculation method;resulting outputs;a method to take into account the energy performance of heat generation devices based on fuel combustion; for space heating generation by combustion sub-systems (boilers, biomass), including control.This standard specifies methods for the calculation of:thermal losses from the heating and the domestic hot water generation system;recoverable thermal losses for space heating from the heating and the domestic hot water generation system;auxiliary energy of the heating and the domestic hot water generation systems.This standard specifies the energy performance calculation of water based heat generation sub-systems including control based on combustion of fuels ("boilers"), operating with conventional fossil fuels as well as renewable fuels. This standard does not cover sizing or inspection of boilers.This standard is also applicable to heat generators for heating or for combined service as domestic hot water, ventilation, cooling and heating. Generators for domestic hot water only are taken into account into part M8-8.This European Standard is the general standard on generation by combustion sub-systems (boilers, biomass) and is also intended for generation for domestic hot water production and/or space heating.These values are input data for calculation of the overall energy use according to EN ISO 52000-1 and EN 15316-1.Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.NOTE 1 In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.Cross References:EN ISO 52000-1EN ISO 13790 (ISO 13790:2008) ASISO 13790:2008 Ed 2 CEN/TR 15316-6-4:2017EN ISO 9488 (ISO 9488:1999 Adopted)EN 15316-3:2017EN 15316-1:2017EN 15316-2:2017All current amendments available at time of purchase are included with the purchase of this document.