BS EN ISO 7668:2021-铝及其合金的阳极氧化在20、45、60或85角处测量阳极氧化涂层的镜面反射和镜面光泽-国家数字标准馆

现行 BS EN ISO 7668:2021

到馆阅读

收藏跟踪

购买正版

Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° 铝及其合金的阳极氧化在20、45、60或85角处测量阳极氧化涂层的镜面反射和镜面光泽

发布日期： 2021-09-09

本文件规定了使用20°（方法A）、45°（方法B）、60°（方法C）和85°（方法D）几何形状测量阳极氧化铝平板样品的镜面反射和镜面光泽的方法，以及使用窄接受角的额外45°方法（方法E）测量镜面反射的方法。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This document specifies methods for the measurement of specular reflectance and specular gloss of flat samples of anodized aluminium using geometries of 20° (Method A), 45° (Method B), 60° (Method C) and 85° (Method D) and of specular reflectance by an additional 45° method (Method E) employing a narrow acceptance angle.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

GB/T 20503-2006

铝及铝合金阳极氧化阳极氧化膜镜面反射率和镜面光泽度的测定 20°、45°、60°、85°角度方向
Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss at angles of 20°,45°,60°or 85°

KS D ISO 7668(2022 Confirm)

알루미늄 및 알루미늄 합금의 양극산화 피막 처리－양극산화피막의 20°, 45°, 60°,85°에서 경면 반사율 및 경면 광택도 측정
铝及其合金的阳极氧化－20°、45°、60°或85°角阳极氧化涂层镜面反射和镜面光泽的测量

Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°
铝及其合金的阳极氧化 - 在20度 45度 60度或85度的角度测量阳极氧化涂层的镜面反射率和镜面光泽度

KS D ISO 7668(2017 Confirm)

알루미늄 및 알루미늄 합금의 양극산화 피막 처리－양극산화피막의 20°, 45°, 60°,85°에서 경면 반사율 및 경면 광택도 측정
铝及铝合金阳极氧化20°、45°、60°或85°角阳极氧化层镜面反射率和镜面光泽的测量

UNE-EN 12373-11-2001

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 11: MEASUREMENT OF SPECULAR REFLECTANCE AND SPECULAR GLOSS OF ANODIC OXIDATION COATINGS AT ANGLES OF 20º, 45º, 60º OR 85º.
铝和铝合金阳极氧化第11部分:阳极氧化涂层在20º、45º、60º或85º角度下的镜面反射率和镜面光泽的测量

BS EN ISO 6719-2010

Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
铝及其合金的阳极氧化用积分球仪测量铝表面的反射特性

Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
铝及其合金的阳极氧化——使用角光度计或简略角光度计测量铝表面的反射特性

Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
铝及其合金的阳极氧化——用积分球仪测量铝表面的反射特性

GB/T 20506-2006

铝及铝合金阳极氧化阳极氧化膜表面反射特性的测定遮光角度仪或角度仪法
Anodizing of aluminium and its alloys - Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer

GB/T 20505-2006

铝及铝合金阳极氧化阳极氧化膜表面反射特性的测定积分球法
Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating - Sphere instruments

DIN EN 12373-11

Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20Â°, 45Â°, 60Â° or 85Â°; English version of DIN EN 12373-11
铝和铝合金.阳极氧化.第11部分:阳极氧化涂层在20°、45°、60°或85°角的镜面反射和镜面光泽的测量；德文版EN 12373-11:2000

BS EN ISO 8251-2018

Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
铝及其合金的阳极氧化阳极氧化膜耐磨性的测定

Anodizing of aluminium and its alloys — Measurement of abrasion resistance of anodic oxidation coatings
铝及其合金阳极氧化 - 阳极氧化涂层的耐磨性测量

DIN EN ISO 7759

Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
铝及其合金的阳极氧化.用测角计或简略测角计测量铝表面的反射特性（ISO 7759-2010）

DIN EN ISO 6719

Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)
铝及其合金的阳极氧化.使用积分球仪器测量铝表面的反射特性（ISO 6719-2010）

BS 6161-11-1985

Methods of test for anodic oxidation coatings on aluminium and its alloys-Measurement of total reflectance using a photoelectric reflectometer
铝及其合金阳极氧化膜的试验方法用光电反射计测量总反射率

BS 09/30195849 DC

BS EN ISO 7759. Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
BS EN ISO 7759 铝及其合金的阳极氧化用测角仪或简略测角仪测量铝表面的反射特性

BS 6161-14-1987

Methods of test for anodic oxidation coatings on aluminium and its alloys-Determination of infra-red reflectance
铝及其合金阳极氧化膜的试验方法红外反射率的测定

BS EN ISO 2931-2018

Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
铝及其合金的阳极氧化通过导纳测量评估密封阳极氧化涂层的质量

Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
铝及其合金的阳极氧化 - 通过测量导纳度评估密封阳极氧化涂层的质量

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统